On Fri, 2015-01-30 at 09:31 +0100, Olivier Delbeke wrote:
> I'm trying the 'tizen' branch, commit 4d13fc323cb9 (January 8). No
> changes from my side. I built it with the default settings and just
> want to start it.
>
> To create the image, I followed the wiki. I made 2 partitions (one
> with tizen-ivi-core and one with tizen-ivi-Modello) and installed grub
> as explained. In my grub.cfg, I created two entries : one for each
> image. Both boot, but result in a black screen.
>
> With the Modello image, I managed to get a shell and an SSH
> connection. I could see that weston is running ; its log seems OK,
> although it mentions both LVDS1 and VGA1. As I'm using a VGA display,
> I tried adding "video=LVDS-1:d" to the kernel command line to disable
> it, but got no improvement. I will try "video=LVDS-A-1:d".
One potential problem can be that weston tries to render to the wrong
(non-existing) display. To eliminate this as a source of problems it is
best to turn that explicitly off in the weston config file. Have you
tried adding
[output]
name=LVDS1 (check the correct name for this from the weston logs)
mode=off
/etc/xdg/weston/weston-genivi-modello.ini,
or /etc/xdg/weston/weston.ini ?
Cheers,
Krisztian
>
> Best regards,
>
>
>
> Olivier Delbeke Senior
> Software Engineer
> [email protected] /
> T. +32 2 389 25 53
> ___________________________
> AWTC Europe S.A. - Avenue
> de l’Industrie, 19 - 1420
> Braine-l’Alleud - Belgium -
> www.aweurope.eu -
> www.aisin-aw.co.jp
> VAT : BE 0474.474.114 - RPM
> Nivelles
>
>
> Inactive hide details for Patrick Ohly ---01/30/2015 09:17:05
> AM---Patrick Ohly <[email protected]>Patrick Ohly ---01/30/2015
> 09:17:05 AM---Patrick Ohly <[email protected]>
>
> Patrick Ohly
> <[email protected]>
>
> 01/30/2015 09:17 AM
>
>
> To
>
> Olivier
> Delbeke
> <[email protected]>
>
> cc
>
> "VanCutsem, Geoffroy" <[email protected]>,
> "[email protected]" <[email protected]>
>
> Subject
>
> tizen-distro: booting (was: Re: [IVI] tizen-distro : memory
> allocation error whenlinkingcrosswalk)
>
>
>
> On Fri, 2015-01-30 at 08:54 +0100, Olivier Delbeke wrote:
> > Here are my latest results :
> > * My own laptop : kernel boots, systemd boots, but I don't get any
> > graphics ; just audit/smack logs. I don't have a shell and cannot
> read
> > the log.
> > * VMWare : kernel boots, systemd boots but display becomes black. I
> > guess that weston is running but I cannot confirm as I don't have a
> > shell. SSH seems to be running, but none of the username/passwords I
> > tried works (including root/tizen). No shell, no logs, stuck.
> > * VTC7110 : same result as on the VMWare : boot messages look
> > relatively ok, but the screen becomes black. No shell (not even on
> > Ctrl-Alt-F1).
> >
> > Next step : try to replace the weston systemd target by a shell ;
> > then, I should be able to see some logs and to see what happens when
> I
> > manually execute weston.
>
> I am currently trying out the "sandbox/pohly/tizen-next" branch,
> unfortunately with similar lack of success. Which revision of
> tizen-distro are you using?
>
> How do you create images?
>
> I tried both the mkefidisk.sh approach and the manual procedure
> described in the Wiki.
>
> With mkefidisk.sh I have the problem that grub gets invoked ("Welcome
> to
> grub!" is printed), but then it gets stuck (no prompt, no further
> output). I tried that for VTC1010 and MinnowMAX.
>
> The Wiki procedure worked better. It results in a more complete grub
> installation and configuration, which gets Linux and systemd running,
> but also without Weston and no login method.
>
> Regarding login, typically Yocto -dev images have an empty password
> for
> root.
>
> --
> Best Regards, Patrick Ohly
>
> The content of this message is my personal opinion only and although
> I am an employee of Intel, the statements I make here in no way
> represent Intel's position on the issue, nor am I authorized to speak
> on behalf of Intel on this matter.
>
>
>
>
> This mail, and any attachments thereto, is intended only for use by
> the addressee(s) named herein and may contain legally privileged
> and/or confidential information. If you are not the intended
> recipient, please note that any review, dissemination, disclosure,
> alteration, printing, copying or transmission of this mail and/or any
> file transmitted with it, is strictly prohibited and may be unlawful.
> If you have received this mail by mistake, please immediately notify
> the sender as well as our mail administrator at
> [email protected], and permanently destroy the original as well
> as any copy thereof.
>
> _______________________________________________
> IVI mailing list
> [email protected]
> https://lists.tizen.org/listinfo/ivi
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki
Business Identity Code: 0357606 - 4
Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
