Thank you for all the help. After playing around with the tuning so more I found I need to use the cable HRC frequencies. There was nothing wrong with the driver or the install. So for anyone else out there. I hope this helps them.
Thanks Again, Drew On 2/12/07, Hans Verkuil <[EMAIL PROTECTED]> wrote:
On Monday 12 February 2007 19:21, Andrew Ziobro wrote: > I have tried everything that I know and am looking for help. > > When I can use mplayer to play a stream from the card, but the tuner > only seems to lock on channel 5 and 6. And the quaility of that > tunning is very poor. Channel 5 audio is clear, but video is mostly > black and white. Channel 6 the video is mostly color, but the sound > has static on it. > > This seems like the same issue as > http://ubuntuforums.org/showthread.php?t=298743 but there does not > apear to have been any resolution. > > Please any help would be greatly welcomed. > > I am running a Fresh Gentoo install with kernel 2.6.19-r5 (Build from > gentoo-sources) > I have emerged the ivtv driver form portage. > I have tried both the firmware that is recommended and the recent > version attached to the .10 series. release canditate. > I did try to install ivtv version 0.10.0r1, but had issues getting > the test directory to comiple. I was able to comment that out and get > the 0.10.0r1 to install, but had the same issues. I even tried the > svn and that had the same results. I assume you are using ivtv-tune to select a channel. Did you select the correct frequency table? I suspect that is simply the problem. Hans _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
