I have been following the MythTV howto on Jarod's site
(http://wilsonet.com/mythtv/index.php) and I cannot get past this one issue.
I have the tuner card connected to a digital cable box which broadcasts on
channel 3. When I tune to channel 3 I can see some resemblance of what is
being broadcasted, but it is way out of tune. The audio seems to be intact,
but the video is all over the place. I've tried doing some fine tuning
using ptune-ui, however it does not help. The composite input seems just
fine, it is just the tv tuner that will not work.
I am using the latest v4l binaries from atrpms.net.
The IVTV init is here:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.1.10 (0.1.10-48.3_pre2_ck100zz.rhfc3.at) loading
ivtv: Linux version: 2.6.9-1.681_FC3smp SMP 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: pci: PCIBUS detected device: 0x7190 vendor: 0x8086
tveeprom: Ignoring new-style parameters in presence of obsolete ones
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7477602
tveeprom: tuner = TCL 2002N (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3445 (type = 12)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615,
Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: Ignoring new-style parameters in presence of obsolete ones
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
msp3400: Ignoring new-style parameters in presence of obsolete ones
msp34xx: init: chip=MSP3445G-B8 +nicam +simple +simpler +radio mode=simpler
ivtv: i2c attach [client=MSP3445G-B8,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 128 buffers of size 32768
ivtv: Create DMA stream 1 using 128 buffers of size 32768
ivtv: Create stream 2 using 128 buffers of size 52224
ivtv: Create DMA stream 3 using 128 buffers of size 32768
ivtv: Create stream 4
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv
i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
Relevant modprobe.conf:
alias char-major-195 nvidia-1_0-6629
alias char-major-81 videodev
alias char-major-81-0 ivtv
Any help would be greatly appreciated.
Thanks!
-peter
<signature>
<name>Peter Eacmen</name>
<email>[EMAIL PROTECTED]</email>
<title>Software Engineer</title>
<affiliation>www.nexaweb.com</affiliation>
<contact>
<email>[EMAIL PROTECTED]</email>
<desk>(617)577-8100 x2019</desk>
<cell>(617)548-5384</cell>
</contact>
</signature>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
ivtv-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
