Thanks.
See below for the ivtv dmesg output...
----- Original Message -----
From: "Edward Brookhouse" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, July 18, 2005 8:24 AM
Subject: RE: [ivtv-devel] Fw: [UNKNOWN CARD] please help PVR-150 only
getting b&w video
Also Try this -
After boot - look at your dmesg | grep ivtv
If any one piece is failing - try loading that module by itself and see
what happends i.e.
Modprobe tveeprom
Modprobe cx25840 (or whatever module your card uses)
Modprobe cx88xx
Modprobe ivtv
So I did manually load each of the above...
Something else to check is that you have told your PVR the right ivtvctl
options for input etc try checking different inputs and see if there is
any change. Make sure you are using NTSC or PAL depending on your setup.
What ivtvctl options do you suggest? I did try going through each of the
inputs via ivtvctl -p# where # is 0-7
only -p0 and -p1 got me video, but BOTH in b&w. The best audio came from -p1
Send over some debug for more info -
The 2nd line below might be the clue... I loaded cx25840 with no options,
simply "modprobe cx25840"
application mixer_applet2 uses obsolete OSS audio interface
cx25840: no version for "struct_module" found: kernel tainted.
cx25840: Ignoring new-style parameters in presence of obsolete ones
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.12-1.1390_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device:
0000/8801
ivtv: Defaulting to WinTV PVR 150 card
ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what
kind of
ivtv: card you have to the ivtv-devel mailinglist:
http://sourceforge.net/projects/ivtv
ivtv: Prefix your subject line with [UNKNOWN CARD].
ivtv: Found an iTVC16 based chip
ivtv: XXX PCI device: 0x7190 vendor: 0x8086
ivtv: i2c attach [client=tveeprom,ok]
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
ivtv: i2c attach [client=cx25840,ok]
tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7865176
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598,
Revision 0xc031b9eb
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: i2c attach [client=(tuner unset),ok]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775: Ignoring new-style parameters in presence of obsolete ones
wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
wm8775: Updating register 2 (R11), config: 1622 active: 1621.
wm8775: Updating register 3 (R12), config: 1802 active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b active: 207b.
wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
wm8775: Updating register 9 (R18), config: 2432 active: 2482.
wm8775: Updating register 10 (R19), config: 2600 active: 2601.
wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
ivtv: i2c attach [client=wm8775,ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 47
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 2860, itv = 0xe8bae520
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
