On Mon, 22 Aug 2005, c.corax wrote:
>>>Hmm Hungary was hard ;-)... On the net a lot of sites say you run
>>>SECAM, but at least some of them say you run PAL D or K (depending on
>>>VHF or UHF). As Philip posted you might have a problem with your
>>>"sound offset" which is 6.5MHz where most others use 5.5MHz.
>> tda9885/6/7: write: byte E 0x09
>> E0-1 sound carrier : 5.5 MHz
>> E6 l pll ganting : 13
>> E2-4 video if : 38.9 MHz
>> E5 tuner gain : normal
>> E7 vif agc output : pin3+pin22 port
>As assumed then. Your tuner is set to 5.5MHz ("E0-1 sound carrier") and
>not to 6.5MHz as specified by the PAL-D/K. Not sure how this can be
>done correctly but I would suggest the ivtv-coders to add an option to
>be able to change the SIF frequence, as some PAL-M/N people also would
>like to choose 4.5MHz (our South American friends).
Scratch my earlier message about tuner - I hadn't thought to look in
tda9887. I'll be poking around this module in detail later today...
Cheers,
Phil
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
