Thank you for all the suggestions, I got sound working last night.
Here is the info for those who might find it useful.
I was issuing this command
modprobe -r wm8775 tuner ivtv tda9887 cx25840 tveeprom msp3400 saa7127
and then systematically loading the modules 1 by 1 with several
combinations of options, with no joy on the audio. I must have tried
every combination of every suggestion given here and on multiple forums
and faqs.
I then added these options to modprobe.conf based on suggestions here
and on various google'd forum entries and SHUTDOWN for 30 seconds as
was suggested again.
options ivtv ivtv_std=0,0 tuner=47,47 tda9887=0,0 ivtv_debug=1,1
options tda9887 port1=0 port2=0
Audio works. My synopsis is that either...
A) The caps really do need to be clean and loaded off the bat with the
right options.
B) There is another module that is doing something I am not aware of,
like an i2c module or something.
So in conclusion, 0.3.7k with the above options in modprobe.conf, with a
full shutdown and at least 30 second wait, will provide a working
PVR150-MCE.
BUT
No audio on my 2nd card (/dev/video1). If that makes sense, let me know
LOL.
For reference.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (k) loading
ivtv: Linux version: 2.6.11-6mdk 686 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
PCI: Found IRQ 10 for device 0000:02:0b.0
PCI: Sharing IRQ 10 with 0000:00:1f.4
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 7969385
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: Encoder revision: 0x02040011
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Create encoder radio stream
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
PCI: Found IRQ 9 for device 0000:02:0c.0
PCI: Sharing IRQ 9 with 0000:00:1f.3
PCI: Sharing IRQ 9 with 0000:00:1f.5
PCI: Sharing IRQ 9 with 0000:02:0e.0
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 8402116
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
ivtv: Encoder revision: 0x02040011
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Create encoder radio stream
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
2:0b.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), cache line size 04
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0c.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), cache line size 04
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
