On Mon, 29 Aug 2005, Philip Rowlands wrote:
On Mon, 29 Aug 2005, Christian Viller Hansen wrote:
Don't forget to try "port2=0 pal=..." alone (i.e. don't set port1). This
sets the Automatic Gain Control output only, not the input.
The only thing I know about the tda9887 module is what Bryan wrote, and I
can't find anything about the AGC. Maybe someone could extend A3...
What's A3?
Answer 3 in Bryan's README/FAQ.
My info is from here, page 17:
http://www.semiconductors.philips.com/acrobat/datasheets/TDA9887_3.pdf
port1=0 controls (I think) "external AGC input".
Depending on the value of E5 and E7... I tried with the only port2=0, and
it didn't work, but the amount of possibilties with "cold boot" / "semi
cold boot(caps not fully discharged)" / "soft reboot" and "module reload"
makes hard to say anything definitive. I can't remember if I rebooted or
just reloaded.
Regards
Christian
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
