Also, here is my /etc/modprobe.conf to help:
alias eth0 e1000
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias ieee1394-controller ohci1394
# nvidia kernel module
alias char-major-195 nvidia-1_0-7667
alias nvidia nvidia-1_0-7667
# ivtv (pvr-500)
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias tveeprom tveeprom-ivtv
alias tuner tuner-ivtv
alias msp3400 msp3400-ivtv
Any help would be appreciated!
- Chris Thielen
> Here is the dmesg output when I try "# mplayer /dev/video0".
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.1 (tagged release) loading
> ivtv: Linux version: 2.6.14-1.1656_FC4smp SMP 686 REGPARM 4KSTACKS
> gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 25 (level, low) -> IRQ 225
> tveeprom: Second (radio) tuner idx 101
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023885
> tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> ivtv0: This is the first unit of a PVR500
> tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
> TEA5767 detected.
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
> tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
> type set to 62 (Philips TEA5767HN FM Radio)
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> cx25840 1-0044: ivtv driver
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 1-001b: ivtv driver
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02040024
> ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or
> 0x02050032.
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> ivtv0: Create encoder radio stream
> tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 26 (level, low) -> IRQ 233
> tveeprom: Second (radio) tuner idx 101
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023885
> tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
> ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
> cx25840 2-0044: ivtv driver
> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
> ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
> wm8775 2-001b: ivtv driver
> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
> ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
> ivtv1: This is the second unit of a PVR500
> ivtv1: Correcting tveeprom data: no radio present on second unit
> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv1: Encoder revision: 0x02040024
> ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or
> 0x02050032.
> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> ivtv: ==================== END INIT IVTV ====================
>
> Again, this is a dual tuner Hauppage PVR-500 under Linux 2.6, ivtv 0.4.1
> from the Fedora MythTV HOWTO RPMs.
>
> I get good video but no sound. I cannot unset the mute option for tuner0,
> but if I change the video source to composite or something besides the
> tuner, I can unmute that sound. I would like to unmute and use the sound
> on tuner0 however.
>
> Thanks for any help,
> Chris Thielen
>
>> On Jan 13, 2006, at 9:23 PM, [EMAIL PROTECTED] wrote:
>>
>>> Hello ivtv-users,
>>> I have a Pentium 4 box with a Hauppage PVR-500 dual tuner
>>> card. I
>>> have ivtv 4.0 installed from RPMs from the Fedora-MythTV FAQ.
>>> When I cat /dev/video0 > test.mpg and use mplayer to play the
>>> file, I have no audio. I also have no audio in MythTV. I do not
>>> have xawtv.
>>> I know audio works and I have set audio to use tuner0 in
>>> ivtvctl.
>>>
>>> ivtv 4.0
>>> Hauppage PVR-500
>>>
>>> What should I try?
>>>
>>
>> We'll need more information, like the ivtv section of dmesg, plus any
>> options in modprobe.conf.
>>
>> You could try the 0.4.1 drivers, but remember to redo the setup of
>> your card in MythTV afterwards, as the inputs changed ordering.
>> Also, the firmware files changed location and name in 0.4.1, but the
>> RPMs from atrpms should handle that for you.
>>
>> Keith C
>>
>> _______________________________________________
>> ivtv-users mailing list
>> [email protected]
>> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>>
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
