Anybody? I'd apprecate any help you guys could offer.
> I just added a PVR-350 to my Fedora Core 3 Myth box. I've been
> following Jarod Wilson's Myth how-to to get it configured, and I'm
> stuck with the following errors.
>
> ivtv: version 0.4.2 (tagged release) loading
> ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
> ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 2927016
> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = MSP4448 (type = 1b)
> tveeprom: decoder processor = SAA7115 (type = 13)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> msp3400 0-0040: ivtv driver
> msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio
> mode=simpler
> ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
> msp3400 0-0040: msp34xxg daemon started
> saa7115 0-0021: ivtv driver
> saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> saa7127 0-0044: ivtv driver
> saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
> logips2pp: Detected unknown logitech mouse model 11
> input: PS/2 Logitech Mouse on isa0060/serio1
> ivtv0: unable to open firmware v4l-cx2341x-enc.fw
> ivtv0: did you put the firmware in the hotplug firmware directory?
> ivtv0 warning: failed loading encoder firmware
> ivtv0 warning: Error loading firmware -3!
> ivtv0: Error -3 initializing firmware.
> ivtv0: Error -12 on initialization
> ivtv: probe of 0000:02:05.0 failed with error -12
>
> The initial testing worked ok, I could capture video to a file and
> view it ok, when I rebooted the system was never able to load the
> firmware properly. I've been searching on google for days, and through
> the list archives. I've seen that I'm not the only one having this
> problem, but none of the fixes I've seen have worked for me. I copied
> the firmware files from the ivtv site, and set the permissions wide
> open. I can't seem to figure this one out... current modprobe.conf
> follows.
>
>
> install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
> # lirc conf
> options lirc_serial irq=4 io=0x3f8
> install lirc_serial setserial /dev/ttyS0 uart none; /sbin/modprobe
> --ignore-install lirc_serial
> alias eth0 via-velocity
> alias snd-card-0 snd-atiixp
> options snd-card-0 index=0
> install snd-atiixp /sbin/modprobe --ignore-install snd-atiixp &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-atiixp { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> /sbin/modprobe -r --ignore-remove snd-atiixp
> alias usb-controller ehci-hcd
> alias usb-controller1 ohci-hcd
> # I2C module options
> alias char-major-89 i2c-dev
>
> -Bill
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
