>> ivtv: ==================== START INIT IVTV ====================
>> ivtv: version 0.4.3 (tagged release) loading
>> ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0
>> ivtv: In case of problems please include the debug info between
>> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
>> ivtv: any module options, when mailing the ivtv-users mailinglist.
>> ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
>> ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 11 (level,
>> low) -> IRQ 11
>> saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
>> ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
>> msp3400 1-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio
>> mode=simpler
>> ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
>> msp3400 1-0040: msp34xxg daemon started
>> tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
>> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
>> tveeprom: ivtv version
>> tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8289714
>> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
>> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>> tveeprom: audio processor = MSP4448 (type = 1b)
>> tveeprom: decoder processor = SAA7115 (type = 13)
>> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
>> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
>> ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
>
> This is your problem. The driver expects to find a saa7115 chip at
> address 0x21, but fails to. One possible reason is that the saa7115
> module is failing to load - check to make sure you have one. Another
> possible reason is the saa7115 is damaged. Checking in Windows would
> verify this (or using i2cdetect in linux).
>
> Keith C
Keith,
Thanks for the info. I tried the following...
modprobe i2c-dev
Then, I did i2cdetect -l and it returned:
i2c-1 unknown ivtv i2c driver #0 Algorithm
unavailable
i2c-0 unknown SiS96x SMBus adapter at 0x1080 Algorithm
unavailable
Then I did a "i2cdetect 1" and this is what I got:
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: UU XX XX UU UU XX XX XX XX XX XX XX XX XX XX XX
50: UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX
I don't understand it really. Could anyone help me read this to find out
what might be the problem? I still have a fishy feeling about my Sis961
Chipset. Can anyone confirm that?
Thanks,
Nate
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
