Hello list,
I have a Yuan PG600 and some problems to get it to work ...
yummed all the ivtv parts for FC4
lspci -v gives:
00:08.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Unknown device ffab:0600
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
dmesg gives:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0: subsystem vendor/device: ffab/0600
ivtv0: cx23416 based
ivtv0: Defaulting to WinTV PVR 250 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what
kind of
ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN CARD].
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
tveeprom: Encountered bad packet header [ff]. Corrupt or not a Hauppauge
eeprom.
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
ivtv0: No tuner detected, default to NTSC
ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0 warning: i2c client addr: 0x00 not found for command 0x40045403!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x00 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613!
ivtv0 warning: i2c client addr: 0x00 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
As I mentioned I reinstalled the firmware parts as per the "Howto" and some
got better. But still gives me a bunch of problems.
Any pointers ??
--
A bartender is just a pharmacist with a limited inventory.
I used to have a handle on life, but it broke
---
Robert Bungener
Dutch World Ventures
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
