Ok Hans, I looked at the board last night and I found the following chips
CX23416-2 CX25843-23 XCEIVE AC2828 or RC2828 (can't read the letters they are too damn small And some kind of mem chip ... Robert On Tuesday 14 March 2006 17:18, Hans Verkuil wrote: > Hmm, I wonder if you have somewhat different hardware. > > Can you make a list of the chips on the card and also of the tuner name? > For the latter you probably have to gently peel off the label in order > to read the tuner type underneath. > > Hans > > On Wednesday 15 March 2006 00:10, Robert Bungener wrote: > > OK got that fixed ... > > > > modprobe cardtype=7 radio=1 > > still missing some tuner info > > > > modprobe.conf has: > > # ivtv modules setup > > alias char-major-81 ivtv > > alias char-major-81 videodev > > alias char-major-81-0 ivtv > > options ivtv tuner=2 > > options msp3400 once=0 simpler=1 simple=0 > > > > dmesg gives: > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.4.3 (tagged release) loading > > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: User specified YUAN PG600/DIAMOND PVR-550 (CX FALCON2) card > > (detected cx23416 based chip) > > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, > > low) -> IRQ 11 > > tveeprom: Encountered bad packet header [ff]. Corrupt or not a > > Hauppauge eeprom. > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > > cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) > > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > > ivtv0: Could not detect tuner standard, defaulting to NTSC. > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > > total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers > > (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > > buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: > > 455 x 4608 buffers (2048KB total) > > ivtv0: Create encoder radio stream > > ivtv0 warning: i2c client addr: 0x00 not found for command > > 0x40045403! ivtv0 warning: i2c client addr: 0x00 not found for > > command 0x40085618! ivtv0 warning: i2c client addr: 0x00 not found > > for command 0x402c5639! ivtv0: Initialized YUAN PG600/DIAMOND PVR-550 > > (CX FALCON2), card #0 ivtv: ==================== END INIT IVTV > > ==================== > > > > More info, I specified tuner=2 but that was only on the "Howto" part. > > I could not find a list with the available options ... > > > > Thanks, > > Robert > > > > On Tuesday 14 March 2006 15:01, Hans Verkuil wrote: > > > Run with ivtv module option cardtype=7. That should work. The card > > > is misdetected as a PVR250, a different card altogether. > > > > > > Yuan makes a mess of their vendor IDs :-( > > > > > > Hans > > > > > > On Tuesday 14 March 2006 21:48, Robert Bungener wrote: > > > > Hello list, > > > > > > > > I have a Yuan PG600 and some problems to get it to work ... > > > > > > > > yummed all the ivtv parts for FC4 > > > > > > > > lspci -v gives: > > > > 00:08.0 Multimedia video controller: Internext Compression Inc > > > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01) > > > > Subsystem: Unknown device ffab:0600 > > > > Flags: bus master, medium devsel, latency 64, IRQ 11 > > > > Memory at dc000000 (32-bit, prefetchable) [size=64M] > > > > Capabilities: [44] Power Management version 2 > > > > > > > > dmesg gives: > > > > ivtv: ==================== START INIT IVTV ==================== > > > > ivtv: version 0.4.3 (tagged release) loading > > > > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS > > > > gcc-4.0 ivtv: In case of problems please include the debug info > > > > between ivtv: the START INIT IVTV and END INIT IVTV lines, along > > > > with ivtv: any module options, when mailing the ivtv-users > > > > mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 > > > > ivtv0: subsystem vendor/device: ffab/0600 > > > > ivtv0: cx23416 based > > > > ivtv0: Defaulting to WinTV PVR 250 card > > > > ivtv0: Please mail the vendor/device and subsystem vendor/device > > > > IDs and what kind of > > > > ivtv0: card you have to the ivtv-devel mailinglist > > > > (www.ivtvdriver.org) ivtv0: Prefix your subject line with > > > > [UNKNOWN CARD]. > > > > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 > > > > (level, low) -> IRQ 11 > > > > tveeprom: Encountered bad packet header [ff]. Corrupt or not a > > > > Hauppauge eeprom. > > > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > > > > ivtv0: No tuner detected, default to NTSC > > > > ivtv0 warning: i2c client addr: 0x21 not found for command > > > > 0x8004646b! ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 > > > > bytes) ivtv0: Encoder revision: 0x02050032 > > > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers > > > > (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x > > > > 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI > > > > stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA > > > > encoder PCM audio stream: 455 x 4608 buffers (2048KB total) > > > > ivtv0 warning: i2c client addr: 0x00 not found for command > > > > 0x40045403! ivtv0 warning: i2c client addr: 0x21 not found for > > > > command 0x40085618! ivtv0 warning: i2c client addr: 0x21 not > > > > found for command 0xc0045627! ivtv0 warning: i2c client addr: > > > > 0x40 not found for command 0x40086d11! ivtv0 warning: i2c client > > > > addr: 0x40 not found for command 0x80287610! ivtv0 warning: i2c > > > > client addr: 0x40 not found for command 0x40287611! ivtv0 > > > > warning: i2c client addr: 0x00 not found for command 0x40085618! > > > > ivtv0 warning: i2c client addr: 0x40 not found for command > > > > 0x40085618! ivtv0 warning: i2c client addr: 0x21 not found for > > > > command 0x40085618! ivtv0 warning: i2c client addr: 0x40 not > > > > found for command 0x80287610! ivtv0 warning: i2c client addr: > > > > 0x40 not found for command 0x40287611! ivtv0 warning: i2c client > > > > addr: 0x21 not found for command 0x40045613! ivtv0 warning: i2c > > > > client addr: 0x00 not found for command 0x402c5639! ivtv0 > > > > warning: i2c client addr: 0x40 not found for command 0x402c5639! > > > > ivtv0 warning: i2c client addr: 0x21 not found for command > > > > 0x40045612! ivtv0 warning: i2c client addr: 0x40 not found for > > > > command 0x80287610! ivtv0 warning: i2c client addr: 0x40 not > > > > found for command 0x40287611! ivtv0: Initialized WinTV PVR 250, > > > > card #0 > > > > ivtv: ==================== END INIT IVTV ==================== > > > > > > > > As I mentioned I reinstalled the firmware parts as per the > > > > "Howto" and some got better. But still gives me a bunch of > > > > problems. > > > > > > > > Any pointers ?? > > > > > > _______________________________________________ > > > ivtv-users mailing list > > > [email protected] > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users -- A bartender is just a pharmacist with a limited inventory. I used to have a handle on life, but it broke --- Robert Bungener Dutch World Ventures _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
