Run with ivtv module option cardtype=7. That should work. The card is
misdetected as a PVR250, a different card altogether.
Yuan makes a mess of their vendor IDs :-(
Hans
On Tuesday 14 March 2006 21:48, Robert Bungener wrote:
> Hello list,
>
> I have a Yuan PG600 and some problems to get it to work ...
>
> yummed all the ivtv parts for FC4
>
> lspci -v gives:
> 00:08.0 Multimedia video controller: Internext Compression Inc
> iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> Subsystem: Unknown device ffab:0600
> Flags: bus master, medium devsel, latency 64, IRQ 11
> Memory at dc000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
> dmesg gives:
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.3 (tagged release) loading
> ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Unknown card: vendor/device: 4444/0016
> ivtv0: subsystem vendor/device: ffab/0600
> ivtv0: cx23416 based
> ivtv0: Defaulting to WinTV PVR 250 card
> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs
> and what kind of
> ivtv0: card you have to the ivtv-devel mailinglist
> (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN
> CARD].
> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> tveeprom: Encountered bad packet header [ff]. Corrupt or not a
> Hauppauge eeprom.
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> ivtv0: No tuner detected, default to NTSC
> ivtv0 warning: i2c client addr: 0x21 not found for command
> 0x8004646b! ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> ivtv0 warning: i2c client addr: 0x00 not found for command
> 0x40045403! ivtv0 warning: i2c client addr: 0x21 not found for
> command 0x40085618! ivtv0 warning: i2c client addr: 0x21 not found
> for command 0xc0045627! ivtv0 warning: i2c client addr: 0x40 not
> found for command 0x40086d11! ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610! ivtv0 warning: i2c client addr:
> 0x40 not found for command 0x40287611! ivtv0 warning: i2c client
> addr: 0x00 not found for command 0x40085618! ivtv0 warning: i2c
> client addr: 0x40 not found for command 0x40085618! ivtv0 warning:
> i2c client addr: 0x21 not found for command 0x40085618! ivtv0
> warning: i2c client addr: 0x40 not found for command 0x80287610!
> ivtv0 warning: i2c client addr: 0x40 not found for command
> 0x40287611! ivtv0 warning: i2c client addr: 0x21 not found for
> command 0x40045613! ivtv0 warning: i2c client addr: 0x00 not found
> for command 0x402c5639! ivtv0 warning: i2c client addr: 0x40 not
> found for command 0x402c5639! ivtv0 warning: i2c client addr: 0x21
> not found for command 0x40045612! ivtv0 warning: i2c client addr:
> 0x40 not found for command 0x80287610! ivtv0 warning: i2c client
> addr: 0x40 not found for command 0x40287611! ivtv0: Initialized WinTV
> PVR 250, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> As I mentioned I reinstalled the firmware parts as per the "Howto"
> and some got better. But still gives me a bunch of problems.
>
> Any pointers ??
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
