I'm building a mythbox using FC5 following Jarrod's walkthrough, and i seem to be having a problem with my pvr-150...everything seemed to be going fine unti i got to this step...
# /usr/bin/ivtvctl -u 0x3000
# /usr/bin/ivtvctl -p 4
# /usr/bin/ivtvctl -f width=720,height=480
when i run it...i get this...
[EMAIL PROTECTED] etc]# /usr/bin/ivtvctl -u 0x3000
not an ivtv driver device!
ioctl VIDIOC_S_STD ok
Standard set to 00003000
here is what my logfile looks like...i see the error while loading the firmware but i don't have a solution on how to fix it since the file the log says does not exist...actually does...it's there and the permissions are fine...
20 16:01:21 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Apr 20 16:01:21 localhost kernel: ivtv: version 0.6.1 (development snapshot compiled on Wed Mar 29 19:14:09 2006) loading
Apr 20 16:01:21 localhost kernel: ivtv: Linux version: 2.6.16-1.2080_FC5 SMP gcc-4.1
Apr 20 16:01:21 localhost kernel: ivtv: In case of problems please include the debug info between
Apr 20 16:01:21 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Apr 20 16:01:21 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Apr 20 16:01:21 localhost kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
Apr 20 16:01:21 localhost kernel: ACPI: PCI Interrupt 0000:01: 07.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20
Apr 20 16:01:21 localhost kernel: tuner 6-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Apr 20 16:01:22 localhost kernel: cx25840 6-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
Apr 20 16:01:24 localhost kernel: cx25840 6-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
Apr 20 16:01:24 localhost kernel: wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #0)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: Hauppauge model 26052, rev C185, serial# 2882909
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: TV standards NTSC(M) (eeprom 0x08)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: audio processor is CX25843 (idx 37)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: decoder processor is CX25843 (idx 30)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: has no radio, has IR remote
Apr 20 16:01:24 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Apr 20 16:01:24 localhost firmware_helper[5536]: Loading of /lib/firmware/v4l-cx2341x-enc.fw for ivtv driver failed: No such file or directory
Apr 20 16:01:25 localhost kernel: ivtv0: Encoder revision: 0x02050032
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Apr 20 16:01:25 localhost kernel: tuner 6-0061: type set to 50 (TCL 2002N)
Apr 20 16:01:25 localhost kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
Apr 20 16:01:25 localhost kernel: ivtv: ==================== END INIT IVTV ====================
now when i try a test capture...it seems to capture fine...but when i try to view it it tells me...this...
[EMAIL PROTECTED] etc]# mplayer -vo xv /dev/video0
MPlayer 1.0pre7try2-3.2.3 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices (Family: 8, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not open config files /root/.lircrc and /etc/lircrc
mplayer: No such file or directory
Failed to read LIRC config file ~/.lircrc.
You will not be able to use your remote control.
Playing /dev/video0.
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
RAWDV file format detected.
Cannot seek backward in linear streams!
Seek failed
and it just keeps saying this over and over...so if anyone has any suggestions i might try i would appreciate it...
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
