[EMAIL PROTECTED] mythtv]# yum install ivtv-firmware ivtv-firmware-audio
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
atrpms [1/5]
core [2/5]
updates [3/5]
freshrpms [4/5]
extras [5/5]
Reading repository metadata in from local files
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for ivtv-firmware-audio to pack into transaction set.
ivtv-firmware-audio-0.0.1 100% |=========================| 1.9 kB 00:00
---> Package ivtv-firmware-audio.noarch 0:
0.0.1-5.at set to be updated
---> Downloading header for ivtv-firmware to pack into transaction set.
ivtv-firmware-1.8a-9.at.n 100% |=========================| 1.7 kB 00:00
---> Package ivtv-firmware.noarch
2:1.8a-9.at set to be updated
--> Running transaction check
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
ivtv-firmware noarch 2:1.8a-9.at atrpms 2.2 k
ivtv-firmware-audio noarch
0.0.1-5.at atrpms 9.6 k
Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 12 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): ivtv-firmware-audi 100% |=========================| 9.6 kB 00:00
(2/2): ivtv-firmware-1.8a 100% |=========================| 2.2 kB 00:00
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: ivtv-firmware ######################### [1/2]
Installing: ivtv-firmware-audio ######################### [2/2]
Installed: ivtv-firmware.noarch 2:1.8a-9.at ivtv-firmware-audio.noarch 0:
0.0.1-5.at
Complete!
no problems, then i do the second part.
[EMAIL PROTECTED] mythtv]# yum install ivtv-kmdl-$KVER
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
atrpms [1/5]
core [2/5]
updates [3/5]
freshrpms [4/5]
extras [5/5]
Reading repository metadata in from local files
Parsing package install arguments
No Match for argument: ivtv-kmdl-2.6.16-1.2080_FC5
Nothing to do
[EMAIL PROTECTED] mythtv]# yum install ivtv-kmdl-2.6.16-1.2080_FC5xen0-0.6.1-109.rhfc5.at.x86_64.rpm
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
atrpms [1/5]
core [2/5]
updates [3/5]
freshrpms [4/5]
extras [5/5]
Reading repository metadata in from local files
Parsing package install arguments
No Match for argument: ivtv-kmdl-2.6.16-1.2080_FC5xen0-0.6.1-109.rhfc5.at.x86_64.rpm
Nothing to do
and thats where i get the problems, I've done this before 3 times now and everytime I do it the same thing happens, i've skipped this part but then my pvr-150 doesn't work, i get a firmware error. I've followed the wiki on ivtvdriver.org page...i'm pretty sure it all goes back to this. i'm posting the ivtv log below so you can see what happend before. I've posted this before on this list as a pvr-150 error, and on the mythtv mailing list, no one can seem to pinpoint what the problem is. Is there some fundemental change between FC4 and FC5 that's not allowing the ivtv drive to load in the correct place? the firmware error below is strange because there are files in the correct directory, but it doesn't see them...i know hotplug isn't supported on FC5 cause they are using Udev now, so i'm not sure if that's the problem...any help would be appreciated.
20 16:01:21 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Apr 20 16:01:21 localhost kernel: ivtv: version 0.6.1 (development snapshot compiled on Wed Mar 29 19:14:09 2006) loading
Apr 20 16:01:21 localhost kernel: ivtv: Linux version: 2.6.16-1.2080_FC5 SMP gcc-4.1
Apr 20 16:01:21 localhost kernel: ivtv: In case of problems please include the debug info between
Apr 20 16:01:21 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Apr 20 16:01:21 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Apr 20 16:01:21 localhost kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
Apr 20 16:01:21 localhost kernel: ACPI: PCI Interrupt 0000:01:
07.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20
Apr 20 16:01:21 localhost kernel: tuner 6-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Apr 20 16:01:22 localhost kernel: cx25840 6-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
Apr 20 16:01:24 localhost kernel: cx25840 6-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
Apr 20 16:01:24 localhost kernel: wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #0)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: Hauppauge model 26052, rev C185, serial# 2882909
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: TV standards NTSC(M) (eeprom 0x08)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: audio processor is CX25843 (idx 37)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: decoder processor is CX25843 (idx 30)
Apr 20 16:01:24 localhost kernel: tveeprom 6-0050: has no radio, has IR remote
Apr 20 16:01:24 localhost kernel: ivtv0: loaded
v4l-cx2341x-enc.fw firmware (262144 bytes)
Apr 20 16:01:24 localhost firmware_helper[5536]: Loading of /lib/firmware/v4l-cx2341x-enc.fw for ivtv driver failed: No such file or directory
Apr 20 16:01:25 localhost kernel: ivtv0: Encoder revision: 0x02050032
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Apr 20 16:01:25 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Apr 20 16:01:25 localhost kernel: tuner 6-0061: type set to 50 (TCL 2002N)
Apr 20 16:01:25 localhost kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
Apr 20 16:01:25 localhost kernel: ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
