Hi Hans
The new ivtv release works great with my PVR-350 capture card.
I use Fedora 5 64 bit, Myhtv 0.19.1 and this release solved the problem changing channel earlyer with ivtv 0.6.2 rpm package from rpms.net
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.3 (development snapshot compiled on Mon 12 Jun 2006 05:49:17 PM CEST) loading
ivtv: Linux version: 2.6.16-1.2122_FC5 SMP gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: version 0.6.3 (development snapshot compiled on Mon 12 Jun 2006 05:49:17 PM CEST) loading
ivtv: Linux version: 2.6.16-1.2122_FC5 SMP gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
Thanks again Hans
Harald
On 6/11/06, Hans Verkuil <[EMAIL PROTECTED] > wrote:Hi all,
I'd like people to have a go with the 0.4.6 and 0.6.3 development
snapshots available here:
0.4.6:
http://ivtvdriver.org/viewcvs/ivtv/branches/0.4.tar.gz?view=tar
0.6.3:
http://ivtvdriver.org/viewcvs/ivtv/branches/0.6.tar.gz?view=tar
The channel changing problem should be fixed now (and should be a bit
smoother too as the encoder is no longer paused/resumed). Please let me
know if there are still problems with it. Also test if you didn't have
problems before: it's done differently now (similar to what Hauppauge
does) so if I'm unlucky it might break something that used to work :-(
There are two pending issues that I'd like to solve before I make
another release: 0.4.6 contains support for cx25840 sliced VBI for
NTSC: I get conflicting reports on whether it works or not.
The second issue is a problem with the i2c bus and tveeprom. This is the
blocking bug that I'd really like to fix before doing a release.
Thanks,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
