hi, I don't have this in a startup script but in a shell script to manully start ivtv.
You could also try disconnecting the machine for 1 minute from power to be sure all registers on the PVR-350 are cleared. Bye, David On Tue, July 4, 2006 7:53 am, Mito wrote: > I haven't found anywhere that had that yet, but out of curiosity what > file is it that had that in it? I have checked all my init scripts etc > and nothing like that exists. > > I did find this however, and it notes that there has been a problem with > this before... I will try loading the msp3400 driver and test that, but I > just find it odd that it used to work, but now doesn't. Here's the link > to the FAQ item I found: > > http://ivtv.sourceforge.net/FAQ.html#_jump14 > > > And after looking at that log output I posted in my last mail, I guess I > am running a saa7115, unless you think there's a way that it's mistakenly > finding the wrong chipset somehow? > > Mito > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Arendt > Sent: Tuesday, July 04, 2006 12:50 AM > To: User discussion about IVTV > Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and kernel > 2.4.17 > > > hi, > > yesterday I also had a problem with sound when upgrading to ivtv 7. > > In my startup scripts, I had a line > > > modprobe msp3400 standard=0x03 > > Removing standard=0x03 fixed to sound problem. > > > bye, David Arendt > > > Mito wrote: > >> Hans, >> >> >> Sorry to take up your time, but I wanted to be sure you saw this. >> >> >> My card is a PVR-150 actually, and I would love to tell you what >> chipset I have to help you out via troubleshooting / testing, but I am >> not sure how > to >> find out the chipset without taking off the heatsink, which I don't >> want > to >> do if I don't have to. >> >> What can I do to help you out in this case, and possibly figure out a >> way > to >> solve my problem at the same time? >> >> Oh, and here's the output of that log-status that you asked for: >> >> >> [EMAIL PROTECTED] mythtv]# ivtvctl --log-status >> ioctl VIDIOC_LOG_STATUS ok ivtv0: ================= START STATUS CARD #0 >> ================= >> tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 tveeprom >> 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) >> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: >> audio processor is MSP3435 (idx 10) tveeprom 0-0050: has radio tuner >> 0-0061: Tuner mode: analog TV >> tuner 0-0061: Frequency: 127.25 MHz tuner 0-0061: Standard: >> 0x00003000 >> saa7115 0-0021: Audio frequency: 48000 Hz saa7115 0-0021: Video signal: >> ok saa7115 0-0021: Frequency: 60 Hz saa7127 0-0044: Standard: 60 Hz >> saa7127 0-0044: Input: normal saa7127 0-0044: Output: S-Video + >> Composite >> saa7127 0-0044: WSS: disabled saa7127 0-0044: VPS: disabled >> saa7127 0-0044: CC: disabled msp3400 0-0040: MSP3435G-B6 rev1 = >> 0x0207 rev2 = 0x2346 >> msp3400 0-0040: Audio: volume 58950 msp3400 0-0040: Audio: balance >> 32768 bass 32768 treble 32768 >> > loudness >> off msp3400 0-0040: Standard: could not detect sound standard (mono) >> msp3400 0-0040: Audmode: 0x0001 msp3400 0-0040: Routing: 0x00000000 >> (input) 0x00000044 (output) >> msp3400 0-0040: ACB: 0x0c00 ivtv0: ================== END STATUS >> CARD #0 ================== >> >> >> >> Mito >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Hans Verkuil >> Sent: Saturday, July 01, 2006 5:00 PM >> To: User discussion about IVTV >> Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and kernel >> 2.4.17 >> >> >> On Saturday 01 July 2006 22:46, Mito wrote: >> >> >>> Hello to all! >>> >>> >>> First of all, thanks to everyone who will help, as I know how much >>> work it is sometimes to help people. >>> >>> My problem first started a few days ago when I was trying to re-setup >>> my frontend to my MythTV system. In doing so, I decided to do an >>> update to my backend server (which in hindsight, I probably shouldn't >>> have done.). It updated my kernel to version 2.6.17-1.2139_FC4. >>> Well, as I always do when possible, I rebooted my server after doing >>> the update just to make sure things behaved properly, and to let the >>> new kernel be used. I left it at this time, but then a day and a half >>> later I noticed that none of my recordings have been taking place. I >>> do a little troubleshooting and do another yum update, and this time >>> find a new ivtv and ivtv-modules (I used the atrpms to install ivtv >>> originally) so I figure that there is a new version of ivtv for my new >>> kernel, cool, this will fix my problem. Well, it did, kinda. Now I >>> am recording video, which is always nice, but no audio. Just to be >>> sure that it wasn't a MythTV problem, I ran this command: >>> >>> >>> cat /dev/video0 > test.mpg >>> >>> Then I played that file, and sure enough, there's video but no sound. >>> Also to make sure that I wasn't having problems with my sound, I >>> played a recording from before the update, and the sound works >>> perfectly. >>> >>> Then in troubleshooting, I backed up my firmware files and then >>> replaced them via the instructions here: >>> http://ivtvdriver.org/index.php/Firmware#Obtaining_and_Installing_the >>> _Firmwa re >>> >>> >>> That still didn't work. so now I'm emailing for help, as I need it >>> :-) >>> >>> >>> Here is my dmesg. Thanks in advance for any help you're able to >>> give! >>> >> >> Please provide the output of ivtvctl --log-status while recording a >> program. It should give me some info on the sound. >> >> By the way: can you verify that your card has a saa7114 chip instead of >> a saa7115? I noticed this in your log. It's probably quite an old >> PVR350, right? If you do have a saa7114, then I'd like to ask you some >> tests. Note that this is unrelated to your sound problem, it's just an >> issue with the saa7114 that I'd like to clear up. >> >> Thanks, >> >> >> Hans >> >> >> >>> ivtv: no version for "struct_module" found: kernel tainted. >>> ivtv: ==================== START INIT IVTV ==================== >>> ivtv: version 0.7.0 (development snapshot compiled on Thu Jun 29 >>> 13:55:05 2006) loading >>> ivtv: Linux version: 2.6.17-1.2139_FC4 mod_unload 686 REGPARM >>> 4KSTACKS gcc-4.0 >>> ivtv: In case of problems please include the debug info between >>> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >>> ivtv: any module options, when mailing the ivtv-users mailinglist. >>> ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) >>> ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 169 >>> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >>> tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 >>> tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) >>> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: >>> audio processor is MSP3435 (idx 10) tveeprom 0-0050: has radio tuner >>> 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) >>> saa7115 0-0021: saa7114 found @ 0x42 (ivtv i2c driver #0) saa7127 >>> 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) >>> msp3400 0-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) msp3400 >>> 0-0040: MSP3435G-B6 supports radio, mode is autodetect and >>> autoselect ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) >>> ivtv0: Encoder revision: 0x02050032 >>> ivtv0: Decoder revision: 0x02020023 >>> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >>> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers >>> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 >>> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: >>> 455 x 4608 buffers (2048KB total) >>> ivtv0: Create encoder radio stream >>> ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB >>> total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers >>> (1024KB total) ivtv0: Create decoder VOUT stream >>> ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB >>> total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner >>> 0-0061: type set to 21 (Temic NTSC (4039 FR5)) >>> ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 >>> ivtv: ==================== END INIT IVTV ==================== >>> >>> >> >> _______________________________________________ >> ivtv-users mailing list [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> >> >> _______________________________________________ >> ivtv-users mailing list [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> > > _______________________________________________ > ivtv-users mailing list [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > _______________________________________________ > ivtv-users mailing list [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
