On Sat, Dec 16, 2006 at 06:24:21PM +0100, Hans Verkuil wrote: > On Saturday 16 December 2006 18:11, Kyrre Ness Sjobak wrote: > > Yup, that seems to be the problem: > > ivtv-tune 1.50 > > Unfortunately, this doesn't mean much since the version number wasn't > updated :-( > > The change was from June 5th 2006. So if the app is older, then it is > certainly wrong.
Kyrre, try rpm -qf `which ivtv-tune` to find out which package you have installed. > > Is Axel Thim still on this list? I think he's got a bug, as the > > yum.log output shows i have installed the newest ivtv package. > > > > Thanks! Now that i know what the problem is, i'll just wait and see > > if some updated packages shows up. Btw, does v4l-ctl work? Can i (in > > the meantime) just use ivtv-tune to get the frequencies, and then use > > v4l-ctl to tune to them? > > Yes, that will work. If changing the tuner with v4l2-ctl works but not > with ivtv-tune, then you must be using an older ivtv-tune. Also check > with 'which -a ivtv-tune' whether you have multiple ivtv-tune apps. > > Hans > > > > > --- Kyrre Ness Sjøbæk > > > > lør, 16,.12.2006 kl. 17.37 +0100, skrev Hans Verkuil: > > > On Saturday 16 December 2006 17:27, Kyrre Ness Sjobak wrote: > > > > Hello! I have used a PVR-150 about half a year now under Fedora > > > > Core 5 - and it has been working happily. After a power failure a > > > > couple of days ago the machine got rebooted (it had about 100 > > > > days uptime), so i decided to install a new kernel. Yum grabbed a > > > > new ivtv, i rebooted the machine, and everything seemed OK. > > > > > > > > That was, until i tried to test the TV-card, as i have heard that > > > > the new kernel/ivtv should have fixed the "low color saturation" > > > > problem (has it?). So i ran "mplayer /dev/video0", and got only > > > > static (as expected), and then used "ivtv-tune -t europe-west -c > > > > E8" to tune the card. Got this response: "/dev/video0: 196.250 > > > > MHz" - but no signal detected. And only static... > > > > > > Make sure that you are using the ivtv-tune from ivtv-0.8. ivtv-tune > > > from earlier ivtv versions does not work with the new 0.8 driver > > > due to a bug in those older ivtv-tune versions. If that doesn't > > > help then provide the output of v4l2-ctl --log-status. > > > > > > Hans > > > > > > > What happened? > > > > Grepped from yum.log: > > > > Dec 15 13:33:39 Updated: ivtv.i386 1:0.8.2-123.fc5.at > > > > Dec 15 13:33:45 Installed: ivtv-kmdl-2.6.18-1.2239.fc5.i686 > > > > 1:0.8.2-123.fc5.at > > > > Dec 15 13:34:18 Erased: ivtv-kmdl-2.6.17-1.2157_FC5 > > > > Dec 15 13:34:34 Erased: ivtv-kmdl-2.6.17-1.2157_FC5smp > > > > Dec 15 13:47:02 Installed: ivtv-kmdl-2.6.18-1.2239.fc5smp.i686 > > > > 1:0.8.2-123.fc5.at > > > > > > > > (i use the smp kernel to get hyper-threading on intel p4) > > > > > > > > dmesg output: > > > > [EMAIL PROTECTED] log]# dmesg | tac | > > > > > > > > > sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p; > > > > > /= START INIT IVTV =/q' | > > > > > tac > > > > > > > > ivtv: ==================== START INIT IVTV ==================== > > > > ivtv: version 0.8.2 (tagged release) loading > > > > ivtv: Linux version: 2.6.18-1.2239.fc5smp SMP mod_unload 686 > > > > REGPARM 4KSTACKS gcc-4.1 > > > > ivtv: In case of problems please include the debug info between > > > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > > > ivtv: any module options, when mailing the ivtv-users > > > > mailinglist. e100: eth1: e100_probe: addr 0xb9ddf000, irq 74, MAC > > > > addr 00:90:27:BE:5F:06 > > > > hda_codec: Unknown model for ALC882, trying auto-probe from > > > > BIOS... ivtv0: Autodetected Hauppauge card (cx23416 based) > > > > ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ > > > > 217 usb 1-1: new low speed USB device using uhci_hcd and address > > > > 4 usb 1-1: configuration #1 chosen from 1 choice > > > > input: Logitech USB Receiver as /class/input/input3 > > > > input: USB HID v1.10 Mouse [Logitech USB Receiver] on > > > > usb-0000:00:1d.0-1 usb 2-2: new full speed USB device using > > > > uhci_hcd and address 2 ivtv0: loaded v4l-cx2341x-enc.fw firmware > > > > (262144 bytes) > > > > tveeprom 1-0050: Hauppauge model 26559, rev F089, serial# 9316023 > > > > tveeprom 1-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) > > > > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') > > > > PAL(D/D1/K) (eeprom 0x74) > > > > tveeprom 1-0050: audio processor is CX25843 (idx 37) > > > > tveeprom 1-0050: decoder processor is CX25843 (idx 30) > > > > tveeprom 1-0050: has radio, has no IR remote > > > > ivtv0: Autodetected Hauppauge WinTV PVR-150 > > > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > > > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) > > > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > > > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > > > > usb 2-2: configuration #1 chosen from 1 choice > > > > Bluetooth: Core ver 2.10 > > > > NET: Registered protocol family 31 > > > > Bluetooth: HCI device and connection manager initialized > > > > Bluetooth: HCI socket layer initialized > > > > Bluetooth: HCI USB driver ver 2.9 > > > > usbcore: registered new driver hci_usb > > > > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > > > > ivtv0: Encoder revision: 0x02050032 > > > > ivtv0: Registered device video0 for encoder MPEG > > > > ivtv0: Registered device video32 for encoder YUV > > > > ivtv0: Registered device vbi0 for encoder VBI > > > > ivtv0: Registered device video24 for encoder PCM audio > > > > ivtv0: Registered device radio0 for encoder radio > > > > tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME > > > > MK3)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > > > > ivtv: ==================== END INIT IVTV ==================== > > > > > > > > > > > > A quick grep shows that the tuner type is set (unlike what > > > > happened to > > > > http://www.gossamer-threads.com/lists/ivtv/users/33280#33280 ): > > > > > > > > [EMAIL PROTECTED] log]# dmesg | tac | sed -n '/=\ \ END INIT IVTV\ \ > > > > =/,/= START INIT IVTV =/p; > > > > /= START INIT IVTV =/q' | tac | grep tuner > > > > tveeprom 1-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) > > > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > > > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) > > > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > > > tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME > > > > MK3)) > > > > > > > > Anyone who knows what is wrong? > > > > > > > > --- Kyrre > > > > > > > > > > > > _______________________________________________ > > > > ivtv-users mailing list > > > > [email protected] > > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > > > _______________________________________________ > > > ivtv-users mailing list > > > [email protected] > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > _______________________________________________ > > ivtv-users mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users -- Axel.Thimm at ATrpms.net
pgpPWhLaNa1BN.pgp
Description: PGP signature
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
