On 12/27/06, Matthew Fedderly <[EMAIL PROTECTED]> wrote: > Ok, under the suggestion that I got from John Drescher, I upgraded to > 2.6.18 kernel with ivtv 0.8.2. In doing this, I moved the card into a > different system (which is why this took so long) > > So, I'll include all the information again, in an updated form. > > The problem that I am having is that I get a lot of static on every > channel (with both inputs). > Additionally, tvtime cannot be used because it says "Cannot open > capture device /dev/video0" (even as root) > > I was using the fedora mythtvology guide this time > (http://wilsonet.com/mythtv/fcmyth.php) > > kernel version: > Linux version 2.6.18-1.2868.fc6 > ([EMAIL PROTECTED]) (gcc version 4.1.1 20061011 > (Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:32:54 EST 2006 > > dmesg: > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.8.2 (tagged release) loading > ivtv: Linux version: 2.6.18-1.2868.fc6 SMP mod_unload 686 REGPARM > 4KSTACKS gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 169 > intel_rng: FWH not detected > input: PC Speaker as /class/input/input1 > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201 > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > intel8x0_measure_ac97_clock: measured 51663 usecs > intel8x0: clocking to 48000 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > tveeprom 3-0050: Hauppauge model 23552, rev E687, serial# 10024648 > tveeprom 3-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) > tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx > 101, type 62) > tveeprom 3-0050: audio processor is CX25843 (idx 37) > tveeprom 3-0050: decoder processor is CX25843 (idx 30) > tveeprom 3-0050: has radio, has no IR remote > ivtv0: Autodetected WinTV PVR 500 (unit #1) > tuner 3-0060: TEA5767 detected. > tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0) > tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Registered device video0 for encoder MPEG > ivtv0: Registered device video32 for encoder YUV > ivtv0: Registered device vbi0 for encoder VBI > ivtv0: Registered device video24 for encoder PCM audio > ivtv0: Registered device radio0 for encoder radio > tuner 3-0061: type set to 70 (Samsung TCPN 2121P30A) > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 185 > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #1) > cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #1) > tveeprom 4-0050: Hauppauge model 23552, rev E687, serial# 10024648 > tveeprom 4-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) > tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx > 101, type 62) > tveeprom 4-0050: audio processor is CX25843 (idx 37) > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > tveeprom 4-0050: has radio, has no IR remote > ivtv1: Correcting tveeprom data: no radio present on second unit > ivtv1: Autodetected WinTV PVR 500 (unit #2) > ivtv1: Encoder revision: 0x02050032 > ivtv1: Registered device video1 for encoder MPEG > ivtv1: Registered device video33 for encoder YUV > ivtv1: Registered device vbi1 for encoder VBI > ivtv1: Registered device video25 for encoder PCM audio > tuner 4-0061: type set to 70 (Samsung TCPN 2121P30A) > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 > ivtv: ==================== END INIT IVTV ==================== > > _______________________________________________
The problem here is that I see nothing wrong with the output you have posted. John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
