Using various versions of KnoppMyth, I can confirm that my card works fine before kernel versions 2.6.18 but not after. How do I check to see if my card is idx 112, type 50?
I wish I could get this to work - the latest KnoppMyth works perfectly out of the box, minus the jittering. I've resorted to installing an older KnoppMyth with a pre 2.6.18 kernel and ivtv 0.4.0 and just upgrading MythTV, apache, etc. myself, which is a pain ... - Christopher Thielen Marty wrote: > Christopher Thielen wrote: > >> I fixed my problem by reverting back to the 2.6.13.2 kernel with ivtv >> 0.4.0. I copied the firmware from an old version of KnoppMyth that did >> work and used it with kernel 2.6.18 (or >) with a very new ivtv and it >> didn't solve the problem, so my problem is not in the firmware, and not >> in the hardware, but rather a bug in ivtv / the kernel. >> >> I'm trying a more recent version of KnoppMyth (August 2006) and if that >> works fine, I'll have greatly narrowed the range of versions where the >> bug was introduced. >> > > Judging from the image at http://chris.luethy.net/get_photo.php?id=670, I'd > say > you have the same problem I see. If that's that case, then you may find that > kernels before 2.6.18 work, and kernels after 2.6.17.14 fail. 2.6.17.14 > corresponds to ivtv version 0.7.4, so all later versions fail. If your tuner > is > also a TCL M2523_5N_E (idx 112, type 50), then it's extremely likely that you > are seeing the same problem. > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
