hi guys
I thought last changes fixed this issue! is this something new or not ?
cheers
seb
--
Sébastien Lelong
Le 31 janv. 2011 à 23:44, Joep Suijs <[email protected]> a écrit :
Hi Toon,
2011/1/31 phalox <[email protected]>:
But both state that it doesn't matter what the resolution is set
to...
So what does that setting do??
If you use the byte-funtion, you'll get an 8-bit result regardless of
the setting.
If you use the word-funtion, you get an 10-bit result. However, when
8-bit conversion is selected, the lower 2 bits are zero.
Isn't there anybody else that has problems with the library?
I have with the new adc library.
AD conversions is kind of elementary, so why doesn't this work?
It works for me when I set the adcon registers myself.
And how to debug it??
Print the value of the relevant (adcon) registers and check their
settings with the datasheet.
Joep
--
You received this message because you are subscribed to the Google
Groups "jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to [email protected]
.
For more options, visit this group at http://groups.google.com/group/jallib?hl=en
.
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
