I made sure normal was the only thing checked in view but still get
"paragraph mark" announced.
I only have Microsoft word, no "Office" versions.
Thanks for your help.
Rich
----- Original Message -----
From: "inthaneelf" <[email protected]>
To: <[email protected]>
Sent: Saturday, May 18, 2013 5:12 AM
Subject: Re: [JAWS-Users] Microsoft Word with too much verbiage.
go into view and see what is selected in there, in the older words if you
had other views than normal or page view selected you could get all kinds
of
verbiage thrown at you, also there should be a options section in the
ribbons, make sure the show all is not turned on in the view portion of
the
options ribbon selection (I am wording it this way since I know that 2003
keystrokes work with the ribbons in most cases, but do not have any office
hire than 2003 so have not the exact knowledge of how to get to things in
the office ribbons)
I hope this helps,
inthane
-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Rich
Sent: Friday, May 17, 2013 6:27 PM
To: [email protected]
Subject: Re: [JAWS-Users] Microsoft Word with too much verbage.
Thanks Mike,
This did not work however.
Any other thoughts would be appreciated.
Rich
----- Original Message -----
From: "Mike W7 B." <[email protected]>
To: <[email protected]>
Sent: Friday, May 17, 2013 9:27 AM
Subject: Re: [JAWS-Users] Microsoft Word with too much verbage.
Hi Rich,
If I remember correctly, press control, shift, +8, on the number row to
turn
off and on
proof reading marks such as the paragraph mark.
HTH
Take care.
Mike
This email was sent from my ILazyBoy.
----- Original Message -----
From: Rich
To: [email protected]
Sent: Thursday, May 16, 2013 6:06 PM
Subject: [JAWS-Users] Microsoft Word with too much verbage.
Hi all,
I have XP home and 14.0.
Recently, I opened a document in "microsoft" word to modify it.
Instead of hearing "blank" for blank lines, I heard "paragraph mark".
My sighted wife said the document had dash marks and other symbols
showing,
that did not seem to be in that document in the past.
Could I have altered the settings somewhere? and how can I fix it?
Thanks so much for any help.
Rich
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
