ChrisOwens;270497 Wrote: > I hadn't considered that people might want to change from one kind of > topology to another. Looking at the UI, there's no way without > resetting the Controller and Receiver both to make this work. It's not that I would want to switch topologies on a regular basis, just that I thought I'd test out how the ad-hoc topology works while I'm temporarily without an access point.
ChrisOwens;270497 Wrote: > If you start by resetting both units, it should be pretty painless > though: I don't see a way to reset the Receiver. I tried doing a "forget this player" from the SqueezeCenter web interface to see whether that made any difference, but it didn't. ChrisOwens;270497 Wrote: > > * Select language > * Welcome screen, press 'go' button > * Select wireless region > * Spinny with message 'finding wireless networks' > * 'Wireless Connection' screen with two options: connect using > squeezebox and connect to other wireless network. This is where things go wrong. At this stage, I only see "Other Network" - there is no "connect using squeezebox" option. One other piece of info that may be relevant. After telling SC7.0 to forget the SBR, if I then power-cycle the SBR, it is immediately recognised again by SC7.0 - could this indicate that the SBR hasn't been "reset"? If so, how do I go about doing that? -- cliveb Transporter -> ATC SCM100A ------------------------------------------------------------------------ cliveb's Profile: http://forums.slimdevices.com/member.php?userid=348 View this thread: http://forums.slimdevices.com/showthread.php?t=43581 _______________________________________________ jive mailing list [email protected] http://lists.slimdevices.com/cgi-bin/mailman/listinfo/jive
