Can you email me the MAC address of the unit? <[EMAIL PROTECTED]> We did have a batch of bad ethernet transformers in some pre- production units, I want to make sure that your SBR wasn't from that batch.
On Feb 23, 2008, at 11:41 AM, gharris999 wrote: > The crossover cable in question checks out OK on my cat-5 tester and > works perfectly with a wired SB2 that I tried yesterday. > > I also tried using a regular cable (that also checks out OK with the > tester) with the SBR today and that didn't work either. That same > cable, when used with the hub, works just fine. > > In every case: no hub between the SBR and the server == no ethernet > link LED on the SBR. > > The only other thing I can think of trying is to swap in a different > NIC in the server. But, as I said, the SB2 didn't have any problems > with the current nic/crossover cable. _______________________________________________ jive mailing list [email protected] http://lists.slimdevices.com/cgi-bin/mailman/listinfo/jive
