I will look at when I get a chance. When that will be I cannot say for sure. I've just been really busy. I will try to get around to it this weekend.
Cheers, Wayne On 10/17/2016 3:40 PM, Jakub Kozdon wrote: > Hi, it looks usable. > > Don't know if it is visible for all, but Wayne, what do you think about it? > > Jakub > > Dne 16.10.2016 v 19:23 Heikki Pulkkinen napsal(a): >> Hi, >> >> I add array feature to my Via Stitching. And an another slowly video >> to watch. >> https://youtu.be/28nfoZPg2bg >> >> Full fixed patch and array test patch. More work have to be done, but >> this was easy start. >> >> Regards >> >> Heikki >> >> On Thu, Oct 13, 2016 at 7:23 PM, Heikki Pulkkinen <hei6m...@gmail.com >> <mailto:hei6m...@gmail.com>> wrote: >> >> Hi, >> >> Here is demovideo about via stitching. It is slowly, because of >> slowly machine. I do some development too, so full patch is >> attached too. >> >> On Tue, Oct 11, 2016 at 5:49 PM, Marcos Chaparro >> <nitrous...@gmail.com <mailto:nitrous...@gmail.com>> wrote: >> >> Hi Heikki, >> is there any chance to make some screenshots or video about >> this? Some of us do compile kicad to get the latest and >> greatest but never applied a patch for a particular feature. >> >> Regards >> >> >> Marcos >> >> On Sat, Oct 8, 2016 at 7:04 AM, Heikki Pulkkinen >> <hei6m...@gmail.com <mailto:hei6m...@gmail.com>> wrote: >> >> Hi, >> >> Putting back that my via stitching tool to routing tool. >> It is better that way, I think. All via tools are in same >> place, and it adds vias to pours only from hotkeys. >> >> >> >> On Sun, Oct 2, 2016 at 12:28 PM, Heikki Pulkkinen >> <hei6m...@gmail.com <mailto:hei6m...@gmail.com>> wrote: >> >> Hi, >> >> Finally Via Stitching without tracks is at zone tool. >> I tested it little bit, but more tests are needed. >> This patch replace all other patches. Do not use them, >> use only this patch. I think this is worth of try. I >> am going to use it anyway, even if it do not get any >> acceptance. First patch is for Fedora users. It makes >> possible to build Kicad in Fedora release wxWidgets >> libs whitout building wxWidget from source. I do not >> know has anybody else that problem, but I had. >> >> >> Heikki >> >> On Tue, Sep 27, 2016 at 6:46 PM, Heikki Pulkkinen >> <hei6m...@gmail.com <mailto:hei6m...@gmail.com>> wrote: >> >> Hi >> >> And I really practice. I made improvement and >> forgot to copy all. So improvement is in these two >> patches. I hope this suggestion is accepted as a >> new feature. >> >> Heikki >> >> On Tue, Sep 27, 2016 at 2:31 PM, Heikki Pulkkinen >> <hei6m...@gmail.com <mailto:hei6m...@gmail.com>> >> wrote: >> >> Hi, >> >> As in practice, I made a patch file of my >> changes Not only diifs. It is SHIFT-ALT-V >> hotkey whitch make buried and blind vias, as >> it is in routing too. >> >> >> Heikki >> >> On Sun, Sep 25, 2016 at 2:25 PM, Heikki >> Pulkkinen <hei6m...@gmail.com >> <mailto:hei6m...@gmail.com>> wrote: >> >> Hi, >> >> I made some improvements to my patch of >> via stitching. Now you can just point >> copper pour place and press V, it make >> trough via. If you press SHIFT+CTRL+V it >> make buried or blind via.It does not >> change working layer. Only when you place >> buried or blind via from different layer >> than it's layer pair is. I think that it >> is quite easy to shoot board full of >> copper pours connecting vias. It is >> possible to remove connecting tracks from >> old designs. Just delete connection from >> pad and use clenup. Only have to remember >> that if there are not at least two copper >> pours in same netcode in different layers >> via is deleted too. Any support? >> >> >> Heikki >> >> On Sat, Sep 24, 2016 at 3:06 PM, Heikki >> Pulkkinen <hei6m...@gmail.com >> <mailto:hei6m...@gmail.com>> wrote: >> >> Hi everybody, >> >> This is my suggestion to via stitching >> without any tracks. It connects >> unconnected vias in different copper >> pours witch has same netcode. Adding >> vias is normal routing process without >> routing tracks. Start - Change Layer - >> End. Tool that do those things >> automatically would be good, so you >> can add all vias in same layer. After >> adding vias, run "Fill or Refill All >> Zones" that "Clenup tracks and vias" >> do not remove partly connected vias. >> >> >> Heikki >> >> >> >> >> >> >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~kicad-developers >> <https://launchpad.net/%7Ekicad-developers> >> Post to : kicad-developers@lists.launchpad.net >> <mailto:kicad-developers@lists.launchpad.net> >> Unsubscribe : https://launchpad.net/~kicad-developers >> <https://launchpad.net/%7Ekicad-developers> >> More help : https://help.launchpad.net/ListHelp >> <https://help.launchpad.net/ListHelp> >> >> >> >> >> >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~kicad-developers >> Post to : kicad-developers@lists.launchpad.net >> Unsubscribe : https://launchpad.net/~kicad-developers >> More help : https://help.launchpad.net/ListHelp > > _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp