Don't know much about the 3 blade. My KR2S has the short Diel gear legs with an o-200 out front swinging a 60/68 (60 inches long) and that gives me about 6 inches of clearance on wheel landings.
Mike Sylvester kr2s builder Birmingham,AL. Cell no.205-966-3854 ________________________________ From: KRnet <[email protected]> on behalf of Kayak via KRnet <[email protected]> Sent: Sunday, April 15, 2018 2:20 PM To: KRnet Cc: Kayak Subject: KR> O-200 prop options Just contemplating engine choices. An O-200 I believe requires quite a large prop diameter. Are there three (or four) blade options that would reduce this while maintaining the general efficiency of a long two blade? _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. krnet - The Mail Archive<https://www.mail-archive.com/[email protected]/> www.mail-archive.com Messages by Thread KR> KR Gathering at MVN 2018 Sid Wood via KRnet. Re: KR> KR Gathering at MVN 2018 Ppaulvsk via KRnet; KR> net problems Ppaulvsk via KRnet. Re: KR> net problems Flesner via KRnet Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
