Hi guys I can get a product called pultrusion, it is pulling Glass & resin through a die, it comes in all sorts of shapes & sizes, not expensive would make good legs,
Robin New Zealand On Fri, 30 Jul 2021, 14:54 John Bouyea, <j...@bouyea.net> wrote: > Kevin, > I have an unmodified "Grumman gear leg" as were available on EBay some 6 > years ago. > 26 1/2" long, 6 3/4" wide at the top & 3 3/4" wide at the bottom, 1" thick > and close to 10 pounds each. > I recall they were cut down and/ or planed thinner before use on KRs at we > don't weigh as much as the certified Grumman airplanes. > And making another plug for the Email Search function, just try this; > > https://list.krnet.org/empathy/search?q=grumman+gear+leg&slist=krnet.list.kr > net.org&collapse=on > <https://list.krnet.org/empathy/search?q=grumman+gear+leg&slist=krnet.list.krnet.org&collapse=on> > I found 18 messages... > John Bouyea > N133RM KR-2S - imported, fixed & flying > www.bouyea.net/cur_proj/N133RM > OR81/ Hillsboro, OR > > -----Original Message----- > Today I'm looking for measured drawings for the landing gear components... > ________________________________ > -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html > -Change list delivery options at > https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board > -Search recent KRnet Archives at > https://list.krnet.org/empathy/list/krnet.list.krnet.org/ > -Search <https://list.krnet.org/empathy/list/krnet.list.krnet.org/-Search> > John Bouyea's decades of archive at > https://www.mail-archive.com/krnet@list.krnet.org/ > ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/krnet@list.krnet.org/
