Date: Sat, 7 Apr 2001 14:44:18 EDT
From: [EMAIL PROTECTED]
Subject: 100CT PCMCIA Problem
Hello,
My 100CT w/W95 OSR2 has been a project in re-configuration after installing a
new hard drive. Most everything is (finally) working pretty well, except for
the PCMCIA settings. Changing from "PCIC Compatible" to "Auto-Detect" in HW
Setup, then rebooting, brings up an error message which says that Card
Services are not available and the PCMCIA interface is not functional.
Clicking OK to that window generates a blue screen error which warns of
system instability. Once the HW setup is switched back to PCIC-Compatible,
everything's okey-dokey again.
Tosh support (for the 100CT, W95B) shows a MACHINE.INF for IRQ steering and
PCMCIA.INF version 1.1. Is this what I need? Have any of you run into this
before? Thanks for any feedback.
Lee
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************