Date: Sat, 7 Apr 2001 16:27:49 -0400
From: "Pres Waterman" <[EMAIL PROTECTED]>
Subject: Re: 100CT PCMCIA Problem
> My 100CT w/W95 OSR2 has been a project in re-configuration after
installing a
> new hard drive. Most everything is (finally) working pretty well, except
for
> the PCMCIA settings. Changing from "PCIC Compatible" to "Auto-Detect" in
HW
> Setup, then rebooting, brings up an error message which says that Card
> Services are not available and the PCMCIA interface is not functional.
> Clicking OK to that window generates a blue screen error which warns of
> system instability. Once the HW setup is switched back to
PCIC-Compatible,
> everything's okey-dokey again.
In my 100 with either 95OSR2 or 98 I am unhappy with "auto-selected". At
home I use an older wireless card which crashes the machine if Card-Bus/16
or auto-selected is used, and at work I use a Card-Bus card which doesn't
work in auto or PCIC mode. I am grateful the Toshibas still offer PCIC
because many modern laptops only allow Card-Bus which is definitely NOT
fully backwards compatible.
Bottom line, I "manually" switch and reboot the type of PCMCIA driver and it
works.
Pres Waterman W2PW
c/o Patchogue Motors, Inc.
Long Island Ford and Kia dealer
GO BILLS!
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************