Date: Sun, 8 Apr 2001 21:55:16 +0100
From: "Paul Betts" <[EMAIL PROTECTED]>
Subject: Re: 100CT PCMCIA Problem
> Windows 98 includes several Troubleshooter Wizards to help you
> troubleshoot device conflicts on your system.
<big snip>
Hi Karen,
Thanks for your prompt reply, I did try and use the trouble shooter this
morning (before I sent my initial mail). For PCMCIA problems it was not that
much cop.
In the help, there was a was an option to "enable 32-bit card support"
(using the PC Card (PCMCIA) wizard. I selected this option and it said it
was not installed and that I should goto to Add/REmove Programs for the
Windows setup.
There is NO entry in the windows setup to configure PCMCIA Cards or the Card
services.
So thats a bit of a dead end.
> Fixing Big Problems with System Troubleshooter
<snip>
> 1.Launch System Troubleshooter by clicking the Start button
> and selecting Run. When the Run dialog box appears, type
> tshoot in the Open box, and then click OK.
Tried this, there is no tshoot applicaiton on my machine :-(
There is NO entry on PCMCIA Socket wihin the Device Manager for "PCMCIA Card
Services".
******The question is "How do I the above PCMCIA Card Services
?????"*********
Other useful information that may help is that when I add or remove a PCMCIA
card, the following message box appears:
"Windows is not able to identify or use the inserted PC Card device because
there is no memory area available to communicate with the device. You must
make a memory area available before this device can be used.Check your
computer's CONFIG.SYS file for a memory manager that is excluding upper
memory regions between A000 and FFFF."
I don't have any entries in my config.sys that reference any memory settings
:-(
Thanks for your help so far
Cheers
Paul
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************