Date: Tue, 22 May 2001 05:01:01 -0500
From: "Dan Scott" <[EMAIL PROTECTED]>
Subject: Re: Missing autoexec.bat and config.sys instructions required
David,
What if you have a floppy that works in DOS but not after the system boots
up? Anywhere to get the Japanese F-E Data external FDD drivers for the
floppy????
Dan
----- Original Message -----
From: "David Hettel" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Monday, May 21, 2001 9:08 AM
Subject: Re: Missing autoexec.bat and config.sys instructions required
> Date: Mon, 21 May 2001 10:05:27 -0400
> From: "David Hettel" <[EMAIL PROTECTED]>
> Subject: Re: Missing autoexec.bat and config.sys instructions required
>
> George;
>
> I am sorry to say this, but at this point I think that you need to
> reformat your Hard drive and start over! It sounds like your registry
> is fried. Just reloading windows will not work for you! If windows
> can find your registry files it likes to keep them, this can lead to a
mess,
> which is what it sounds like you have.
>
> The floppy drive in the Libretto, is a boot device, that means for DOS
> you really don't need any drivers! If it will not work, then either the
> floppy is bad, or your Dos is corrupt. As it works for you under
> windows, I would say that means your Dos is corrupt.
>
> Again if you have a **normal** non imported Libretto (not a Japanise
> keyboard) then you really don't need a keyboard driver, to remap your
> keyboard.
>
> As has been pointed out to you it is **normal** from windows 95 on
> to have a blank Autoexec.bat and config.sys file. Your Autoexec.bat
> file may contain a setting for the prompt char that you wish to use, and
> perhaps a dir to search if it can not find a command file. Loading
anything
> in the config.sys file will generally give you an error about real mode
drivers
> under win95, 98, 98se ME ect.
>
> David Hettel
>
> ----- Original Message -----
> From: "George Waller" <[EMAIL PROTECTED]>
> To: "Libretto" <[EMAIL PROTECTED]>
> Sent: Monday, May 21, 2001 9:13 AM
> Subject: Missing autoexec.bat and config.sys instructions required
>
>
> > Date: Mon, 21 May 2001 14:12:55 +0100
> > From: "George Waller" <[EMAIL PROTECTED]>
> > Subject: Missing autoexec.bat and config.sys instructions required
> >
> > As described in other posts my config and autoexec files have somehow
lost
> > all their content... does anyone here have suitable command strings I
can
> > insert in these files suitable for the Libretto 100CT (UK version)... at
the
> > very least I need a floppy drive detectable and a keyboard properly
mapped
> > when I start in DOS mode - at present I have neither!!
> >
> > GW
> >
> >
> >
> >
> > **************************************************************
> > http://libretto.basiclink.com - Libretto mailing list
> > http://libretto.basiclink.com/archive - Archives
> > http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> > -------UNSUBSCRIBE-------
> > mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
> > --------UNSUBSCRIBE DIGEST------
> > Use above but add DIGEST to the subject line...
> > **************************************************************
> >
>
>
>
>
>
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> -------UNSUBSCRIBE-------
> mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
> --------UNSUBSCRIBE DIGEST------
> Use above but add DIGEST to the subject line...
> **************************************************************
>
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
