Date: Sun, 01 Sep 2002 20:06:40 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Complete success
John, I lost track of what you've been doing here. I gather that you're packing higher capacity LiIon cells into the standard sized L50/70 power pack case... yes? And it this perhaps something that hasn't been done in the past? Had you acquired the cells online somewhere? I seem to recall discussion on the size of the cells, and the necessity of cutting back the libby battery casing to fit them. And just how might one pronounce your last name? (Always interested in words, names, and etymology.) ... "moo-see-lee-wiks"? Matt(s) >From: John Musielewicz <[EMAIL PROTECTED]> > >The Libretto 70CT charged the 2000 mAh battery just fine. I had the >machine on to monitor it and it took 4 and 1/2 hours to completely >charge from 1% to 100%. The batteries got slightly warm during >charging but the whole machine was warm so that wouldn't be unusual. I >took one more look at the pack and how it fit into the compartment and >it looks like if a person simply used a dremal tool and opened the top >so the batteries can rest against the libretto case the pack'll fit >just like a regular 1200 mAh. Even the two protrusions on the side >which keep the battery from sagging and straining the connector will >go right in place. Nobody would know the pack is any differant unless >you took it out. However I can't finish mine off with this because I >broke my top when I took it off:(! But 18mm batteries WILL work!!! > >Heh...now I'm eager to build a 4000 mAh battery pack!!! That will be >completely out of spec.. > >John _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
