Date: Wed, 4 Sep 2002 10:02:42 -0700
From: "Regis Lee" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Complete success

John,

 did you happen to take pictures while working on your project?


----- Original Message -----
From: "John Musielewicz" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Wednesday, September 04, 2002 9:24 AM
Subject: Re: [LIB] Complete success


> Date: Wed, 04 Sep 2002 09:20:11 -0700
> From: John Musielewicz <[EMAIL PROTECTED]>
> Subject: Re: [LIB] Complete success
>
> > Date: Tue, 03 Sep 2002 05:19:59 +0000
> > From: "Matthew Hanson" <[EMAIL PROTECTED]>
> > Subject: Re: [LIB] Complete success
> >
> > >From: John Musielewicz <[EMAIL PROTECTED]>
> > >
> > >A very long time ago I posted this link for large single li-ion cells
> > >availible in the US to anyone. Much higher capacity than the standard
> > >panasonic plus in my opinion better quality (I don't like panasonic
> > >batteries anyway:):
> > >
> > >http://www.maxxprod.com/mpi-7.htm
> >
> > Okay...  I wonder if this 18.3mm diameter is what is helping get the
> > 2000mAh.  I'm guessing it took you a while to locate these, and you went
> > with what you found.  If there are any 16mm cells with that power
rating,
> > they're probably hiding out there in the tangle that is the web is they
> > exist at all.
>
> Yes its usually how capacity is improved...the battery is made bigger at
> first. These actually seem to have improved capacity too since the runtime
> was twice as long.
>
> >
> > >There was some argument  they wouldn't fit because they were thicker
> > >than the standard panasonic 18.3mm as opposed the 16mm. However I
> > >ordered some to try since the 1200 mAh pack I had for my 70CT was shot
> > >and I wanted a 2000 mAh pack in the standard size since I didn't like
> > >the way the 2400 mAH pack stuck out and the 1200 mAh had too short
> > >battery life.
> >
> > Yeah... I finally got one of the bigger batteries myself.  But I still
lov
> > the way the system looks with the smaller battery.  The idea of packing
mo
>
> > power in the standard battery pack sounds very appealing!
> >
> > From what you've written if I recall correctly, you must have cut off
the
> > entire top of the battery pack to be able to squeeze those 18.3mm dia.
cel
>
>
> Yes. It is wide enough but not tall enough.
>
> > in there.  2.3mm is a significant amount of extra space to have to
provide
>
> > Was there much or any extra space available with the original cells in
> > there?
>
> About 2 or 2.1 mm from the top of the 16 mm batteries to the bottom of the
> libretto case.
>
> >
> > You wrote:
> > >I took one more look at the pack and how it fit into the compartment
and
>
> > >looks like if a person simply used a dremal tool and opened the top so
th
> > >batteries can rest against the libretto case the pack'll fit just like
a
> > >regular 1200 mAh. Even the two protrusions on the side which keep the
> > >battery from sagging and straining the connector will
> > >go right in place. Nobody would know the pack is any differant unless
you
> > >took it out. However I can't finish mine off with this because I broke
my
> > >top when I took it off
> >
> > I'm not clear on what you were going to do with the top of the battery
cas
>
> >   It sounds like you purposely removed it to provide enough space to get
> > those 18.3mm cells in there... no?
>
> The very top needs to be opened up so the 2AH batteries go through it.
>
> >
> > >The correct pronunciation is muse-see-leev-ich
> >
> > Accent on the 2nd syllable?  Man... how do you deal with getting people
to
> > pronounce that one!?  By grade school, it must have gotten pretty old.
:-0
> >
> > M.
> >
> > _________________________________________________________________
> > Join the world-s largest e-mail service with MSN Hotmail.
> > http://www.hotmail.com
> >
> > **************************************************************
> > http://libretto.basiclink.com - Libretto mailing list
> > http://www.silverace.com/libretto/ - Archives
> >
> >                  -------TO UNSUBSCRIBE-------
> > Reply to any of the list messages. The reply mail should be
> > addressed to: [EMAIL PROTECTED] - Then replace any text
> > on the message's subject line: cmd:unsubscribe
> >               --------TO UNSUBSCRIBE DIGEST------
> > Do above but with this on subject line: cmd:unsubscribe digest
> > **************************************************************
> >
>
>
>
>
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list
> http://www.silverace.com/libretto/ - Archives
>
>                  -------TO UNSUBSCRIBE-------
> Reply to any of the list messages. The reply mail should be
> addressed to: [EMAIL PROTECTED] - Then replace any text
> on the message's subject line: cmd:unsubscribe
>               --------TO UNSUBSCRIBE DIGEST------
> Do above but with this on subject line: cmd:unsubscribe digest
> **************************************************************
>
>




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************


Reply via email to