Date: Wed, 04 Sep 2002 10:34:50 -0700 From: John Musielewicz <[EMAIL PROTECTED]> Subject: Re: [LIB] Complete success
No I didn't. I do have a camera though and could take one of the battery. I have no website to put it up though. John > Date: Wed, 4 Sep 2002 10:02:42 -0700 > From: "Regis Lee" <[EMAIL PROTECTED]> > Subject: Re: [LIB] Complete success > > John, > > did you happen to take pictures while working on your project? > > ----- Original Message ----- > From: "John Musielewicz" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Wednesday, September 04, 2002 9:24 AM > Subject: Re: [LIB] Complete success > > > Date: Wed, 04 Sep 2002 09:20:11 -0700 > > From: John Musielewicz <[EMAIL PROTECTED]> > > Subject: Re: [LIB] Complete success > > > > > Date: Tue, 03 Sep 2002 05:19:59 +0000 > > > From: "Matthew Hanson" <[EMAIL PROTECTED]> > > > Subject: Re: [LIB] Complete success > > > > > > >From: John Musielewicz <[EMAIL PROTECTED]> > > > > > > > >A very long time ago I posted this link for large single li-ion cells > > > >availible in the US to anyone. Much higher capacity than the standard > > > >panasonic plus in my opinion better quality (I don't like panasonic > > > >batteries anyway:): > > > > > > > >http://www.maxxprod.com/mpi-7.htm > > > > > > Okay... I wonder if this 18.3mm diameter is what is helping get the > > > 2000mAh. I'm guessing it took you a while to locate these, and you we > > > with what you found. If there are any 16mm cells with that power > rating, > > > they're probably hiding out there in the tangle that is the web is the > > > exist at all. > > > > Yes its usually how capacity is improved...the battery is made bigger at > > first. These actually seem to have improved capacity too since the runti > > was twice as long. > > > > > > > > >There was some argument they wouldn't fit because they were thicker > > > >than the standard panasonic 18.3mm as opposed the 16mm. However I > > > >ordered some to try since the 1200 mAh pack I had for my 70CT was sho > > > >and I wanted a 2000 mAh pack in the standard size since I didn't like > > > >the way the 2400 mAH pack stuck out and the 1200 mAh had too short > > > >battery life. > > > > > > Yeah... I finally got one of the bigger batteries myself. But I still > lov > > > the way the system looks with the smaller battery. The idea of packin > mo > > > > > power in the standard battery pack sounds very appealing! > > > > > > From what you've written if I recall correctly, you must have cut off > the > > > entire top of the battery pack to be able to squeeze those 18.3mm dia. > cel > > > > > > Yes. It is wide enough but not tall enough. > > > > > in there. 2.3mm is a significant amount of extra space to have to > provide > > > > > Was there much or any extra space available with the original cells in > > > there? > > > > About 2 or 2.1 mm from the top of the 16 mm batteries to the bottom of t > > libretto case. > > > > > > > > You wrote: > > > >I took one more look at the pack and how it fit into the compartment > and > > > > > >looks like if a person simply used a dremal tool and opened the top s > th > > > >batteries can rest against the libretto case the pack'll fit just lik > a > > > >regular 1200 mAh. Even the two protrusions on the side which keep the > > > >battery from sagging and straining the connector will > > > >go right in place. Nobody would know the pack is any differant unless > you > > > >took it out. However I can't finish mine off with this because I brok > my > > > >top when I took it off > > > > > > I'm not clear on what you were going to do with the top of the battery > cas > > > > > It sounds like you purposely removed it to provide enough space to g > > > those 18.3mm cells in there... no? > > > > The very top needs to be opened up so the 2AH batteries go through it. > > > > > > > > >The correct pronunciation is muse-see-leev-ich > > > > > > Accent on the 2nd syllable? Man... how do you deal with getting peopl > to > > > pronounce that one!? By grade school, it must have gotten pretty old. > :-0 > > > > > > M. > > > > > > _________________________________________________________________ > > > Join the world-s largest e-mail service with MSN Hotmail. > > > http://www.hotmail.com > > > > > > ************************************************************** > > > http://libretto.basiclink.com - Libretto mailing list > > > http://www.silverace.com/libretto/ - Archives > > > > > > -------TO UNSUBSCRIBE------- > > > Reply to any of the list messages. The reply mail should be > > > addressed to: [EMAIL PROTECTED] - Then replace any text > > > on the message's subject line: cmd:unsubscribe > > > --------TO UNSUBSCRIBE DIGEST------ > > > Do above but with this on subject line: cmd:unsubscribe digest > > > ************************************************************** > > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://www.silverace.com/libretto/ - Archives > > > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
