I'm not sure, but based on my experience with P/390a I suspect you many
have a problem. TCP/IP generally requires the card to be set up in
"DIX" mode while SNA requires IEEE mode. They cannot coexist on the
same card.
===========================================
Cyrus Mead IV [EMAIL PROTECTED]
IntelliWare Systems, Inc.
--- An IBM Premier Business Partner ---
Tel 1.847.816.4963 * +1 817.277.0800
Fax +1 847.816.7066
Visit us at http://www.intelliware.com
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED]] On Behalf Of
Dave Myers
Sent: Thursday, February 21, 2002 1:40 PM
To: [EMAIL PROTECTED]
Subject: Re: MP3000-H70's Ethernet Card Question
In a message dated 2/21/2002 12:12:54 PM Mountain Standard Time,
[EMAIL PROTECTED] writes:
> But the question concerned sharing a single adapter between the OS/2
stack
> and a
> S390 stack.
No...my original question that started this thread was:
"Can I use the H70's "built in" ethernet card for both SNA to OS/390 and
for
the Support Element's(os/2)
TCP/IP protocol ?? "
I wasn't asking if I could share with an S390 TCPIP stack....
Dave
