Are you using SuSE 8 in a zSeries ???

I have SuSE 8 config in 5 LPARs in a z800, and there are /etc/zipl.conf

Anttnio.

Ceruti, Gerard G wrote:
Hi Antonio

Hmmmmmmmmm there is no zipl.conf file in the /etc dir ????

Gerard

-----Original Message-----
From: "Anttnio Pires de Castro Jr." [mailto:[EMAIL PROTECTED]
Sent: 29 August 2003 02:59 PM
To: [EMAIL PROTECTED]
Subject: Re: SuSE SLES8 64-bit + dasdfmt


1 - Add a new disk in /etc/zipl.conf ... parameters="dasd=0b0e,0b0f,0b10 root=/dev/dasda1" ...

new disc (dasdc)= 0b10


2 - Reboot your linux:


3 - Format disk:

dasdfmt -b 4096 -f /dev/dasdc

4 - Partitioning disk (create dasdc1):

fdasd /dev/dasdc

5 - Create a file system

mke2fs -b 4096 /dev/dasdc1

6 - Add new disk in the /etc/fstab

/dev/dasdc1 /opt ext3 defaults 1 2


[]'s, Anttnio.



Ceruti, Gerard G wrote:

Hi Listners

Perhaps you are able to point me in the right direction ,
we are installing Suse8 in LPAR mode , I have got the load off the CD
and am able to telnet to Linux,
my problem is now how do I format the disks'
I have done the 'insmod dasd_mode dasd=***,***' command
but when I do a cat of /proc/dasd/devices it shows the disks as unknown

any ideas
Thanks
Gerard



____________________________________________________________________________ ______________________________________________________

For information about the Standard Bank group visit our web site

<www.standardbank.co.za>


____________________________________________________________________________
______________________________________________________

Disclaimer and confidentiality note
Everything in this e-mail and any attachments relating to the official

business of Standard Bank Group Limited is proprietary to the group.


It is confidential, legally privileged and protected by law.
Standard Bank does not own and endorse any other content. Views and

opinions are those of the sender unless clearly stated as being that of the group.

The person addressed in the e-mail is the sole authorised recipient.

Please notify the sender immediately if it has unintentionally reached you and do not read,

disclose or use the content in any way.
Standard Bank can not assure that the integrity of this communication has

been maintained nor that it is free of errors, virus, interception or interference.

____________________________________________________________________________
_______________________________________________________



-- Antonio Pires Suporte Tecnico - AGANP

__________________________________________________________________________________________________________________________________

For information about the Standard Bank group visit our web site 
<www.standardbank.co.za>
__________________________________________________________________________________________________________________________________

Disclaimer and confidentiality note
Everything in this e-mail and any attachments relating to the official business of 
Standard Bank Group Limited  is proprietary to the group.
It is confidential, legally privileged and protected by law.
Standard Bank does not own and endorse any other content. Views and opinions are those 
of the sender unless clearly stated as being that of the group.
The person addressed in the e-mail is the sole authorised recipient. Please notify the 
sender immediately if it has unintentionally reached you and do not read,
disclose or use the content in any way.
Standard Bank can not assure that the integrity of this communication has been 
maintained nor that it is free of errors, virus, interception or interference.
___________________________________________________________________________________________________________________________________



-- Antonio Pires Suporte Tecnico - AGANP

Reply via email to