Operator log was stopped. I will retry tomorrow at some point with the log started and see if anything is written there. Will keep you posted Neale.
-----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Neale Ferguson Sent: 15 June 2016 16:19 To: [email protected] Subject: Re: Ubuntu under z/VM Installation / IPL problem Bizarre. How does a device go from active to not operational? No messages on the z/VM operator log? On 6/15/16, 11:03 AM, "Linux on 390 Port on behalf of Terry Madge" <[email protected] on behalf of [email protected]> wrote: > -> 0000000000002590 SSCH B2339000 000000000000FF20 CC 0 > SCH 0000 DEV 0100 > CPA 00008410 PARM 00000000 KEY 0 FPI 80 LPM 80 >VDEV 0100 CCW 66400001 00000080 STS 0E > -> 0000000000002590 SSCH B2339000 000000000000FF20 CC 0 > SCH 0000 DEV 0100 > CPA 00008410 PARM 00000000 KEY 0 FPI 80 LPM 80 >VDEV 0100 CCW 66400001 00000080 STS 0E > -> 0000000000002590 SSCH B2339000 000000000000FF20 CC 3 >Start subchannel failed > SCH 0000 DEV 0100 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
