According to Wilson G. Hein: While burning my CPU.
>
>
>
> > -----Original Message-----
> > From: Bob Nielsen [mailto:[EMAIL PROTECTED]]
> > Sent: Saturday, June 19, 1999 2:45 AM
> > To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> > Subject: Re: Mainboard Serial Ports
>
> > So far so good.
>
> Now what?
>
> > > I'll try setting the IRQ's to Legacy ISA and see if it
> > makes any difference.
>
> No diference.
>
> I did double check I can see the outgoing packets in listen, but nothing
> happens in the tnc. I know I'm missing something simple between
> mkiss/kissattach and the tnc. This is on a RH5.2 system. Back to digging in
> the docs...
I have not been following this thread but considering the facts i have seen,
check and see if you have defined the "speed" correctly in
/etc/ax25/axports it must match the tnc's tbaud which is normaly 9600 baud
(i think).
>
> Wilson
>
--
Regards Richard.
[EMAIL PROTECTED]
