suggestion: try using the blue samsumg modem that your isp should be able to provide. bezeqint provided me with one when they switched me from pptp to pppoe (did so without asking me even).
i had a similar problem when they switched me from PPTP to PPPoE ... i ended up having to play with the alcatel modem for a couple weeks but even that modem with its internal goodies (it has a router built-in) was not able to connect ... so i ended up connecting with their samsung blue modem ... and yes, it is "true" (according to the several Bezeq and Bezeqint.net support staffers i spoke with) that they don't like to support PPTP on their dsl lines, so once you have a PPPoE modem, they *do* turn off your PPTP ... this is their policy since at least 5 months now... i hope that helps... yasha > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Tue, June 17, 2003 8:18 AM > To: [EMAIL PROTECTED] > Subject: RE: PPPoE on Linux - timeout waiting for PADO/PADS packets > > > Thanks. I 'm aware of that button. > I dthis reset this morning but it didn't help. > Actcom support (a Debian user himself, it turned) said that > as far as he's aware once Bezeq notices you use PPPoE they'll > support on PPPoE on the line. Bezeq support denied this. > Bezeq support also said they don't support PPPoE on that > modem and the only thing they can tell me to do is to reset the modem. > > My next line of options: > > 1. Test it with the Windows machine connected directly to the modem. > 2. Upgrade the modem to PRO and use its dialer. > > Any other suggestions? > > Thanks, > > --Amos > > > -----Original Message----- > > From: Guy Teverovsky > > [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, June 17, 2003 3:14 AM > > To: [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED] > > Subject: Re: PPPoE on Linux - timeout waiting for PADO/PADS packets > > > > > > There is a small button (about a size of a pinhead) at the back of the > > modem. > > Use it to reset the modem to factory defaults. Reboot the modem > > (disconnect/connect the power) and let it sync.After that it > > should work > > with PPTP. > > > > Guy > > > > On Mon, 2003-06-16 at 09:26, [EMAIL PROTECTED] wrote: > > > Hello, > > > > > > I've followed the instructions of enabling PPPoE on Linux > > > as described at http://www.isoc.org.il/~doron/PPPoE.html > > > and it worked at first but now after a reboot it stopped. > > > > > > I get multiple messages like "Timeout waiting for PADO packets" > > > and some "Timeout waiting for PADS packets". I tried configuraing > > > the modem back to the PPTP setup but the old PPTP doesn't > > work either > > > (gives same messages, but much less of them). > > > > > > The modem is an ethernet SpeedTouch Home, debian unstable. ISP > > > is actcom. Kernel is 2.4.20 with mppe and preemptive patches. > > > > > > I googled for the error message but it looks like people mostly > > > suspect the line or the ISP, not the setup. Also the PPTP broke > > > so I don't know where to proceed. > > > > > > Any hints anyone? > > > > > > Thanks, > > > > > > --Amos > > > > > > ================================================================= > > > To unsubscribe, send mail to [EMAIL PROTECTED] with > > > the word "unsubscribe" in the message body, e.g., run the command > > > echo unsubscribe | mail [EMAIL PROTECTED] > > -- > > > > > > ================================================================= > > To unsubscribe, send mail to [EMAIL PROTECTED] with > > the word "unsubscribe" in the message body, e.g., run the command > > echo unsubscribe | mail [EMAIL PROTECTED] > > > > > > > > ---------- Your email is protected by Mailshell ---------- > > To block spam or change delivery options: > http://www.mailshell.com/control.html?a=blshp8bbumg87yq1j9157qv2pz 6_58z35eg0 Wouldn't you rather have amos.shapira.com as your personal domain? http://rd.mailshell.com/ad465 Earn up to $3 for each of your friends who signs up with Mailshell! http://rd.mailshell.com/sp5 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/2003 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
