Linux-Misc Digest #620, Volume #18 Fri, 15 Jan 99 01:13:12 EST
Contents:
Re: R/W CD as backup option? (Dave Brown)
ppp is reconnectiong all the time for no reason ([EMAIL PROTECTED])
Re: What does the command who | sort+4 do? (brian moore)
Re: 128 bit Netscape 4.08 built against glibc (Mike Dowling)
Re: Linux is not even in Windows 9X's class. (Colin Day)
Re: R/W CD as backup option? (Christopher Browne)
Re: 128 bit Netscape 4.08 built against glibc (Patrick O'Neil)
Re: Zoom Modem ([EMAIL PROTECTED])
Re: SCSI, RAID controllers, Linux. . . (Harry McGregor)
Re: * and dot files (joseph_a_philbrook__iii)
Re: fvwm2 aspect (Geert Stremersch)
Re: linux 2.2.0pre problems with midi (Frank Hale)
Re: Web-board ("Kerry J. Cox")
Re: how to set execution directory path ? (Rob Mahurin)
Re: Q: Downloading and installing Linux (Morten Frederiksen)
Re: fvwm2 aspect (alex)
2.2.0pre7 kernel installation questions (Rafe Colburn)
other libc6 in RedHat than in SuSE? (Karl Schmid)
Re: fvwm2 aspect (alex)
----------------------------------------------------------------------------
Subject: Re: R/W CD as backup option?
From: [EMAIL PROTECTED] (Dave Brown)
Reply-To: [EMAIL PROTECTED]
Date: 15 Jan 99 04:29:25 GMT
In article <77ma2j$usm$[EMAIL PROTECTED]>, [EMAIL PROTECTED] says...
>
>On Thu, 14 Jan 1999 15:17:58 +0000, Kerry J. Cox
><[EMAIL PROTECTED]> wrote:
>>My boss approached me the other day concerning our current backup
>>protocol. He's considering using a Read/Write CD to backup our
>>,,,
>- You're obviously limited to about 660MB of data, which may be an
>issue.
>...
Well, don't forget that Gnu tar does do compression, so you could
probably count on backing up a Gb per CD. I've got some CDRWs, but
their such a pain (can't be read on a couple of my machines), etc.
Other than using them for very temporary storage, I've not found them
very useful... especially with CDR blanks down to $1. (well, 50 for
$50.)
--
Dave Brown Austin, TX
------------------------------
From: [EMAIL PROTECTED]
Subject: ppp is reconnectiong all the time for no reason
Date: Thu, 14 Jan 1999 14:53:18 GMT
Reply-To: [EMAIL PROTECTED]
I have my ISP configured with ppp under ISDN. Mail and news are still not
working perfectly, but Netscape works almost ok. Two points are obvious:
1. When I open Netscape and try to connect the first time, this failes. Reload
works, and all other www traffic too.
2. After I have terminated the Netscape session, the connection is terminated
after 60 seconds, as I configured it, BUT after another 60 sec interval there is
a reconnection on the www port (80) for no reason ! This continues in cycles.
Not good for my nerves and for my telephone bill ! Who knows the trick ?
Regards, Eggert
=====================================================
Answers please in this newsgroup!
[EMAIL PROTECTED]
=====================================================
------------------------------
From: [EMAIL PROTECTED] (brian moore)
Subject: Re: What does the command who | sort+4 do?
Date: 15 Jan 1999 05:01:56 GMT
On 14 Jan 1999 16:03:36 -0800,
Brian Newman <[EMAIL PROTECTED]> wrote:
> In article <77lklk$nph$[EMAIL PROTECTED]>, Dan says...
> >
> >Rachel <[EMAIL PROTECTED]> wrote:
> >: Hi - What does the command who | sort+4 do?
> >
> >First of all trying using man. ie "man who" to find out what "who"
> >does. The | takes the output from that and pipes it to the input of
> >sort. "sort+4" isn't actually a command you forgot a space. Try "man
> >sort" to find out what it does.
>
> I don't want to encourage people *not* to use "man", but I don't want to
> discourage newbies, being a journeyman newbie myself. :)
>
> "who" shows you who is logged in, "|" (pipe) pipes the output of that command to
> the next one, "sort" sorts whatever was input to it, "+4" indicates to sort at
> the 4th character position... or is it the 4th from the left (0), which would be
> the fifth?
Close: it's based on 'fields', not characters (and the initial field is
numbered 0).
--
Brian Moore | "The Zen nature of a spammer resembles
Sysadmin, C/Perl Hacker | a cockroach, except that the cockroach
Usenet Vandal | is higher up on the evolutionary chain."
Netscum, Bane of Elves. Peter Olson, Delphi Postmaster
------------------------------
From: [EMAIL PROTECTED] (Mike Dowling)
Crossposted-To: comp.os.linux.x,comp.os.linux.setup
Subject: Re: 128 bit Netscape 4.08 built against glibc
Date: 14 Jan 1999 08:40:44 GMT
On Tue, 12 Jan 1999 03:03:52 +0000, mickey stein <[EMAIL PROTECTED]> wrote:
>Chris Leith wrote:
>
>> Does anyone know where I can get a glibc version of Netscape 4.08 with
>> 128 bit encryption capabilities? I can get 4.5 directly from Netscape,
>> but I was under the impression that it was still buggy. Is that true?
>>
> I'm using the 4.5 glibc vers of 4.5 with 128 bit encryption. I can't
>see that it's anymore buggy than
> the older versions. I'm sure it's got it's bugs but so far so
>good,
Funny, 4.5 is the buggiest netscape version yet! It invariably crashes
whenever you click on an email aaddress. I have yet to see a netscape
version that is not beset with *severe* bugs, but 4.5 takes the cake. Not
only is it buggy for me, I have also seen numerous questions about in in
news groups such as this, all reporting the same thing.
That said, while there is a libcrypt provided with glibc, it is *not* linked
to the netscape binary. Netscape encryption is performed by netscape.
Cheers,
Mike Dowling
--
My email address [EMAIL PROTECTED] above is a valid email address.
It is, in fact, a sendmail alias; the digit 'N' is incremented regularly.
Spammed aliases will be deleted. Currently, mike[5,7] have been deleted.
If email to mikeN bounces, try mikeN+1.
------------------------------
From: Colin Day <[EMAIL PROTECTED]>
Crossposted-To: alt.linux,alt.os.linux,comp.os.linux.advocacy
Subject: Re: Linux is not even in Windows 9X's class.
Date: Thu, 14 Jan 1999 23:29:57 -0500
winsor wrote:
> Michael Powe wrote:
> >
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > >>>>> "Mike" == mjb007 <[EMAIL PROTECTED]> writes:
> >
> > Mike> because thanks to MS, 90% of computer users are people who
> > Mike> should never have been allowed to buy them in the first
> > Mike> place. Thanks to Bill Gates' Business Saavvy(SP?), he will
> > Mike> always have a market with them by playing 'hey, we're normal
> > Mike> people doing this' and feelgood commercials set to Rolling
> > Mike> Stones music.
> >
> > That reminds me of one of my cow-orkers, who told a client flat-out
> > "You shouldn't have bought a computer!" after the client complained "I
> > shouldn't have bought a computer from you guys" because the tech would
> > not do tutorial stuff with the client over the phone. We were
> > crackin' up!
> >
> > mp
> >
> > 8<---------------how-easy-is-it-to-demunge-an-address?------------------->8
> > #! /usr/bin/perl # if you are [EMAIL PROTECTED] (Another Luser):
> > while ($line = <>){ if ($line =~ m/^\s*$/ ){ last; }
> > if ($line =~ m/^From: (\S+) \(([^()]*)\)/){ $from_address = $1; } }
> > if ($from_address =~ m/\S+NOSPAM\S+/){ $x = index($from_address, NOSPAM);
> > substr($from_address, $x, 6+1) = ""; printf("The real address is %s\n",
> > $from_address);}else { printf("No munge, just plain %s\n",$from_address);}
> > printf("\nBrought to you by the Truth In Mail Headers Foundation\n");
> > 8<-----------------------here's-one-example------------------------------>8
> >
> > - --
> > Michael Powe
> > [EMAIL PROTECTED] http://www.trollope.org
> > Portland, Oregon USA
> >
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v0.9.0 (GNU/Linux)
> > Comment: Encrypted with Mailcrypt 3.5.1 and GNU Privacy Guard
> >
> > iD8DBQE2nGa1755rgEMD+T8RAt5QAJ9L6bYUZwpXa+kBb8ijztLx2CU8ogCfdjOT
> > fDG8PIS4++/vnBC7PgUYNAo=
> > =X42g
> > -----END PGP SIGNATURE-----
> >
> >
> >
> hehehehe
> All this grumbling...........would 75% of we "Linux users" use Linux if
> it weren't for finding this "free UN*X clone operating system" while
> surfing under an M$ operating system???
I found Linux at Best Buy. TeX/emacs (with some extras) for $47.99?I'll buy
that!
> I'd think not 8^P
> To find something "better" we first have to find something that's not as
> "good"........
> For many users M$ produces a product that suits them well.
> and as I've stated before I would NOT give linux to anyone who doesn't
> UNDERSTAND the M$ operating system,(configuration and such) or is
> willing to spend hours reading.
> nuff said???
------------------------------
From: [EMAIL PROTECTED] (Christopher Browne)
Subject: Re: R/W CD as backup option?
Date: 15 Jan 1999 02:44:35 GMT
Reply-To: [EMAIL PROTECTED]
On Thu, 14 Jan 1999 15:17:58 +0000, Kerry J. Cox
<[EMAIL PROTECTED]> wrote:
>My boss approached me the other day concerning our current backup
>protocol. He's considering using a Read/Write CD to backup our
>servers. We use all Sun machines using Solaris 2.6. What we're
>thinking about doing is setting up a fast PC, i.e. 350-400 MHz and
>putting a Read/Write CD on it and then using it to backup pertinent
>data. Right now we have a tape backup that works fine under the Sun
>machines.
>Has anyone else tried this? Any input on what might be involved in
>getting somethig like this to function?
- You're obviously limited to about 660MB of data, which may be an
issue.
- Based on the "PC Connection" catalogue in front of me, you can get a
box of CD-R's in bulk for under $2 a pop in quantities of on the order
of 100. Which might well be overpriced; I think I've seen 'em at about
$1 apiece.
If you schedule to "burn" a CD each week, that shouldn't cost more than
$100/yr for the CD supply.
In theory, you save a bit by using a CD-RW, but that requires that you
reuse the CD at least ten times.
And consider that setting up a proper backup schedule so that you keep
*some* long term archives results in a need to have a bunch of CD-RWs.
A fairly sensible coverage would, for weekly backups, include:
- 5 weeks worth of weekly CDs (covers a month, plus the CD being burned)
- 4 "monthly" CDs (to cover 3 months in a quarter, plus a CD being
burned)
- 5 quarterly CDs (4 quarters per year, plus one being burned).
Which adds to a population of 14 CD-RWs, worth not far from $300.
For that kind of money, you can probably find bulk CD-Rs for $1 apiece
and get daily backups.
Admittedly, the $300 worth of CD-RWs are reusable, and thus the $300
lasts several years. On the other hand, for $300, you could perhaps get
300 CDs, which would be weekly backups for *FIVE YEARS.*
Think about the trade-offs; my money's on the disposables, because I
figure you need to make a *LOT* of reuse of CD-RWs to make 'em
economically preferable.
--
"You're one of those condescending Unix computer users!"
"Here's a nickel, kid. Get yourself a real computer" - Dilbert.
[EMAIL PROTECTED] <http://www.hex.net/~cbbrowne/lsf.html>
------------------------------
From: Patrick O'Neil <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.x,comp.os.linux.setup
Subject: Re: 128 bit Netscape 4.08 built against glibc
Date: Thu, 14 Jan 1999 08:01:31 -0700
On 14 Jan 1999, Mike Dowling wrote:
> On Tue, 12 Jan 1999 03:03:52 +0000, mickey stein <[EMAIL PROTECTED]> wrote:
> >Chris Leith wrote:
> >
> >> Does anyone know where I can get a glibc version of Netscape 4.08 with
> >> 128 bit encryption capabilities? I can get 4.5 directly from Netscape,
> >> but I was under the impression that it was still buggy. Is that true?
[...]
> Funny, 4.5 is the buggiest netscape version yet! It invariably crashes
> whenever you click on an email aaddress. I have yet to see a netscape
> version that is not beset with *severe* bugs, but 4.5 takes the cake. Not
I have been using the 128bit NS 4.5 for a while. Only recently have I
been having any problems with it (on a RH 5.2 system). My problem isn't
email addresses, but just my homepage: http://www.freshmeat.net
It may have something to do with the change in layout of the page. I say
this because my problems with NS have only come out with this page since
the layout change.
The problem is that it will start loading the page but just after it gets
the title headers loaded, before any of the heart of the page is loaded,
NS 4.5 just quits. No error messages, nothing. Annoying as hell. I have
had to restart and restart NS numerous times to get it to load the page
without a crash. Last night, I gave up after 4 attempts and just used
kfm.
Anyone else see this problem?
patrick
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Zoom Modem
Date: Thu, 14 Jan 1999 14:54:28 GMT
In article <[EMAIL PROTECTED]>,
"Jeff Hill" <[EMAIL PROTECTED]> wrote:
> I have a zoom 56k flex modem upgraded to v.90. It performs quite well but
> sometimes it locks up. I then have to turn it off and back on again. This
> gets frustrating because it is in another part of the building.
>
> Any suggestions? Do I need a specific init string?
I have a Zoom 33.6 external modem, and I used to have similar lock-ups. I
suspect that the problem was power-related, since I've gotten a UPS, the
lock-ups have stopped.
I've noticed that sometimes my power flickers for such a short period that the
lights don't even flicker, but the UPS beeps. I got the UPS when one of these
incidents that was a bit longer took out a filesystem, the lack of modem
lock-ups was a pleasant bonus.
--
Jim Buchanan [EMAIL PROTECTED] [EMAIL PROTECTED]
================= http://members.iquest.net/~jbuchana ====================
"...But were oddly afflicted with a monomania for building what, in the
ancient Amriccon, was denominated 'churches' -a kind of pagoda instituted
for the worship of two idols that went by the names of Wealth and Fashion"
-Poe, Mellonta Tauta
==========================================================================
============= Posted via Deja News, The Discussion Network ============
http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
------------------------------
From: [EMAIL PROTECTED] (Harry McGregor)
Crossposted-To: comp.os.linux.hardware
Subject: Re: SCSI, RAID controllers, Linux. . .
Date: Fri, 15 Jan 1999 05:37:58 GMT
The U usualy means ultra, that should not make a differnce for you.
check out these sites:
It seems like the raid device is an invisable (acts a single disk)
controler, and should work fine, you should be able to find info about
how to control it on these sites.
http://metalab.unc.edu/LDP/HOWTO/mini/DPT-Hardware-RAID.html
http://linas.org/linux/raid.html
Harry
------------------------------
From: [EMAIL PROTECTED] (joseph_a_philbrook__iii)
Crossposted-To: comp.unix.shell
Subject: Re: * and dot files
Date: 14 Jan 1999 15:12:00 GMT
In article <77hhil$buu$[EMAIL PROTECTED]>, chris ulrich <cdu@jawa.> wrote:
>echo * .[!.]*
>
>(this misses files ..* which are not common. * .[!.]* ..* is correct)
>
> You will live a longer, happier life if you simply never think
>in terms of .* unless you know *exactly* what you are doing.
Sounds like good advise to me... But I do seam to remember someone earlier
in this thread complaining that such precise commands are a pain to type or
something... one could always put the command in a script in ones command
path contianing the exact command form desired... possibly $HOME/bin/rmdot
if this command
cat $HOME/bin/rmdot
yields this result
#!/usr/bin/sh
rm .[!.]*
then assuming you did something like this
chmod 700 $HOME/bin/rmdot
And assuming $HOME/bin is in your command path...
then all you have to do is be in the dir you want to flush the dot files
from and type rmdot at the $ [or #] prompt right?
And of course you can name rmdot almost anything YOU can remember at the
command prompt...
--- ___
<O> <-> Joe (theWordy) Philbrook
^
\___/ < [EMAIL PROTECTED] >
------------------------------
From: Geert Stremersch <[EMAIL PROTECTED]>
Subject: Re: fvwm2 aspect
Date: Thu, 14 Jan 1999 14:07:50 +0000
alex wrote:
> hey,
>
> anyone figured out if it is possible to put a graphical image into
> background? not just color or xpm files..
>
> thanks, alex
do you mean something like
xv -root -max -quit file.jpg
geert
------------------------------
From: Frank Hale <[EMAIL PROTECTED]>
Subject: Re: linux 2.2.0pre problems with midi
Date: 15 Jan 1999 05:47:43 GMT
[EMAIL PROTECTED] wrote:
>
> Sorry can't really help with a solution but one thing in you post does mean
> that I have a question for you...
>
> You say that you have it running as a module, well, does the module autoload
> and if so are you using kerneld or the new kernel kmod style? And also what
> version of the modutils are you running?
>
> I ask these because I am having immense trouble getting my modules to compile
> without unresolved symbols and autoload.
>
> Anything you can off would be great.
>
Kernel 2.2.0pre7 will compile on a stock RH 5.2 system with no changes.
It will work fine except I get only 3 error messages but it doesn't seem
to cause any trouble so far.
Jan 15 00:29:16 FranksPC kernel: Cannot find map file.
Jan 15 00:29:16 FranksPC kernel: Error seeking in /dev/kmem
Jan 15 00:29:16 FranksPC kernel: Error adding kernel module table entry.
I upgraded the modutils after I played around with it but it still
doesn't get rid of those 3 errors. Yes I did get the src.rpm and rebuilt
it. And then installed it. no change.
Just to reiterate the kernel is functioning perfectly except it spits
out those 3 error messages. All modules loaded and working.
--
From: Frank Hale
Email: [EMAIL PROTECTED]
ICQ: 7205161
Homepage: http://members.xoom.com/frankhale/
Jade: http://jade.netpedia.net/
Windows VirusScan 1.0 - "Windows found: Remove it? (Y/N)"
------------------------------
From: "Kerry J. Cox" <[EMAIL PROTECTED]>
Subject: Re: Web-board
Date: Thu, 14 Jan 1999 15:21:04 +0000
Matt's WWWBoard has some known security issues. Even though I have run
it and like it also, I would recommend using something else. Try either
Selena Sol's board or look at CGI-Resources.com or just do a simple
search, you'll find lots of hits.
KJ
KaSI wrote:
> Have a look at www.cyberarmy.com/wwwboard
> KaSI
>
> Gilligsberger Bruno wrote:
>
> > I want to set up a web-board (web-bulletin) . Who knows software?
>
> --
> -~-~-~-~-~-~-~-~-~-
> Visit me at http://f7alpha1.informatik.fh-muenchen.de/~ifw97102
> PGP key: finger [EMAIL PROTECTED]
> -~-~-~-~-~-~-~-~-~-
------------------------------
From: Rob Mahurin <[EMAIL PROTECTED]>
Subject: Re: how to set execution directory path ?
Date: Thu, 14 Jan 1999 15:29:59 +0000
Dmitriy wrote:
>
> Let's say I have directory /home/dev
> --->/my_cpp
> --->/my_tcl
> --->/my_bin
> How can I set a path on Red Hat 5.2 to /home/dev/ so that I can execute
> anything in it as well
> as in /home/dev/ subdirectories without explicitly specifying each one ?
> Thanks in advance,
> Dmitriy.
check this out:
10:19 $ dir src/*
src/set_vesablank src/set_vesablank.c
src/21days:
day01
src/tyc:
ch1 ch2 holyshitballs
10:19 $ dir src/* | grep :
src/21days:
src/tyc:
10:20 $ dir /home/alphenglor/src/* | grep :
/home/alphenglor/src/21days:
/home/alphenglor/src/tyc:
10:20 $ echo $PATH
/usr/local/qt/bin:/usr/local/qt/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games
10:22 $ for i in $(dir /home/alphenglor/src/* | grep :); do export
PATH=$i$PATH; done
10:24 $ echo $PATH
/home/alphenglor/src/tyc:/home/alphenglor/src/21days:/usr/local/qt/bin:/usr/local/qt/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games
/bin/dir on my system is just a copy of /bin/ls; I used it I've aliased
'ls' to alter the default output. But does this do what you wanted?
Rob
--
Many a wife thinks her husband is the world's greatest lover.
But she can never catch him at it.
------------------------------
From: Morten Frederiksen <[EMAIL PROTECTED]>
Subject: Re: Q: Downloading and installing Linux
Date: Thu, 14 Jan 1999 14:34:40 GMT
On 14 Jan 1999, Rod Smith wrote:
> [Posted and mailed]
>
> In article <[EMAIL PROTECTED]>,
> Morten Frederiksen <[EMAIL PROTECTED]> writes:
>
> > I tried the installation on another PC, where the installation detected
> > the CD-rom drive (IDE). However, the installation does not recognize the
> > CD in the drive as the Linux CD, and consequently stops the installation.
> > Is the CD required to have a particular label or to be burnt in any
> > particular way?
>
> See:
>
> http://www.users.fast.net/~rodsmith/rhjol.html
Thanks, these text cleared up much of the confusion about recording Redhat
Linux on CD, and even though I do not have access most of the utilities
mentioned, I will try to figure out a way to do it.
Regards
Morten Frederiksen
mailto:[EMAIL PROTECTED]
http://www.but.auc.dk/~33frede/
------------------------------
From: [EMAIL PROTECTED] (alex)
Subject: Re: fvwm2 aspect
Date: 14 Jan 1999 14:58:42 GMT
Geert Stremersch ([EMAIL PROTECTED]) wrote:
:>alex wrote:
:>>
:>> anyone figured out if it is possible to put a graphical image into
:>> background? not just color or xpm files..
:>do you mean something like
:>xv -root -max -quit file.jpg
:>geert
that works of course but vi uses cpu etc. i suppose that fvwm itself can
do that.. but how!? that is the question (c) w.s.
------------------------------
From: Rafe Colburn <[EMAIL PROTECTED]>
Subject: 2.2.0pre7 kernel installation questions
Date: Thu, 14 Jan 1999 10:24:17 -0500
I have a system that's running Redhat 5.2 pretty much out of the box (I've
installed some Perl modules and Sybase, but that's it), and I'd like to
upgrade to compile and install the latest development kernel.
I've been working through it using the Linux Kernel HOWTO from:
http://www.linuxhq.com/HOWTO/Kernel-HOWTO.html
And I'm at a poiint where I'm making sure I have all of the necessary
software installed on my box, based on the list in:
/usr/src/linux-2.2.0pre7/Documentation
I've installed most of the upgrades that I need, but I have a few
questions before I go on:
How do I tell if I have the correct version of Loadlin? The documentation
says version 1.6a is required, but doesn't explain how you get the version
number.
PCMCIA and PPP - The box I'm using does not need PCMCIA or PPP (it's not a
laptop, and it doesn't have a modem). Do I need to worry about
installing/updating these?
Util-Linux - I downloaded a more recent version of Util-Linux, but there
are some pretty stern warnings in the README file. It says that you
probably shouldn't install all of the components of util-linux, but only
the ones that you need. I don't know which ones are needed for the kernel
upgrade.
It also says that version 2.1.121 of the Kernel modules are required, and
that you can find out the version using 'insmod -V'. I'm not sure what to
run insmod -V on though. Also, I'm not sure where to get updates to the
modules that I have.
I did download version 2.1.121 of modutils, but it says in the README that
they must be compiled under a 2.1.x kernel. Is this what I need to
upgrade, and do I need to install a 2.1.x kernel, and compile and install
the modutils before I can move to the most recent kernel?
Thanks,
Rafe
--
Rafe Colburn | <[EMAIL PROTECTED]>
Senior Internet Technologist | http://www.interpath.net
Interpath Communications | 919.654.2247 x246
------------------------------
From: [EMAIL PROTECTED] (Karl Schmid)
Subject: other libc6 in RedHat than in SuSE?
Date: Thu, 14 Jan 1999 10:35:06 -0400
Hi,
here is what I guess is a typical linux newbie question:
I installed a package of programs for comparing DNA sequences that were
compiled for linux RedHat5.1. When I start any of these programs, I get the
following messages:
(the name of the program is blastp)
./blastp: error in loading shared libraries
/usr/i486-linux-libc6/lib/libc.so.6: undefined symbol: _dl_profile
The person who compiled the program told me that my SuSE 5.3 distribution
may use a different libc6 library.
Is there any way to get around this problem?
Best,
Karl
------------------------------
From: [EMAIL PROTECTED] (alex)
Subject: Re: fvwm2 aspect
Date: 14 Jan 1999 15:16:04 GMT
alex ([EMAIL PROTECTED]) wrote:
:>that works of course but vi uses cpu etc. i suppose that fvwm itself can
:>do that.. but how!? that is the question (c) w.s.
oops, wrong.. no xv in background running.. but still, fvwm should be
able to do that too..
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.misc) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Misc Digest
******************************
