Thanks Lawson!
What are the "other parameters" for setserial? If they are in the HOW-TO I can look them up. Also, what is "spd_vhi" ?
Please pardon my newbie questions.
I'm going to give this a shot tonight when I get home, thanks again!
Thanks,
Frank Merenda�| Applications Developer - [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
ProBusiness http://www.probusiness.com <http://www.probusiness.com>
�(Formerly Conduit Software)
"Some people won't dance if they don't know who's singing. Why ask
ahead? It's your hips that are swinging." -Propellerheads
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 01, 1999 1:02 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: RE: Modem configuration
>
>
> You don't need to mess with inittab. Let's get it working first, then
> you can put the commands in /etc/rc.d/rc.local.
>
> First of all, if you are trying to use it as /dev/modem and
> haven't done
> anything to set up /dev/modem,
>
> cd /dev
> rm -f modem
> ln -s ttyS3 modem
>
> You only need to do that once.
>
> /sbin/setserial /dev/ttyS3 irq 3 <other parameters>
>
> This you need to do at each boot, so it can go in rc.local, after the
> isapnp stuff.
> I use spd_vhi. I think irq 3 is the default for ttyS3, so
> you might not
> need the setserial, but it won't do any harm.
>
> Lawson
> >< Microsoft free environment
>
> This mail client runs on Wine. Your mileage may vary.
>
>
>
