On 08/10/2017 05:49 PM, Tim Mooney wrote:
In regard to: RE: [E] Re: [Linux-PowerEdge] replacing a failed hard drive...:If you're not seeing that function in the iDRAC, make sure you are running the latest version. I'm currently running firmware version 2.41.40.40You're right, it is a function of iDRAC version. Despite the post I initially quoted, I've since found documentation that vdisk management was added in the 2.x releases for iDRAC 7 and apparently iDRAC 8. The particular system that has the failed drive happens to not be at the 2.x release for iDRAC 7. We're going to schedule an outage for this weekend and remedy that. We're also going to pull a report from our OME system to try identify any other systems that don't have recent iDRAC 7 or iDRAC 8 versions. Thanks much to everyone that's responded! It's been very helpful in filling in what we were missing.
Shouldn't need any downtime. Just download and run https://downloads.dell.com/FOLDER04020316M/1/iDRAC-with-Lifecycle-Controller_Firmware_XTPX4_LN_2.41.40.40_A00.BIN
Tim
<<attachment: boutilpj.vcf>>
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
