I now have the ditto max working with ftape. I use a jumper card that I
obtained from Iomega to allow me to use the drive with NT so no probs with
ISAPNP!
The tail log now shows loads of overrun errors and attempts to increase the
threshold but the drive does read and write, very slowly. The maximum I
have achieved so far is about 10Mb/min.
The max speed is configured as 400 and the threshold as 20 in the insert
script for the module.
I use SuSE 6.0 with the 2.25 kernel from SuSE.
Pat Malone
==============================
[EMAIL PROTECTED]
==============================
http://www.bigfoot.com/~patrick.malone
==============================
"He [President Clinton] should lay it on the table and let the
American people decide."
PETE KAYE (US Congressman), Radio 4
