Well yeah, I know, but with an internal connected to an accelerator card
rated at 4Mb/s I would expect a little more! Running it under NT I get an
average of 36Mb/min. Obviously it varies according to the type of data,
whether its large files or lots of small ones, compression ratios etc but
10Mb/min is way too slow!
By the way I meant to say that I had configured the install script with a
max speed of 4000 not 400.
>Geeze, with RH 5.2, 2.0.36 and an external standard 2G DITTO, I get 5Mb/min
:)
>--Tom
Pat Malone wrote:
> I now have the ditto max working with ftape. I use a jumper card that I
> obtained from Iomega to allow me to use the drive with NT so no probs with
> ISAPNP!
>
> The tail log now shows loads of overrun errors and attempts to increase
the
> threshold but the drive does read and write, very slowly. The maximum I
> have achieved so far is about 10Mb/min.
>
> The max speed is configured as 400 and the threshold as 20 in the insert
> script for the module.
> I use SuSE 6.0 with the 2.25 kernel from SuSE.
>
> Pat Malone
> ==============================
> [EMAIL PROTECTED]
> ==============================
> http://www.bigfoot.com/~patrick.malone
> ==============================
> "He [President Clinton] should lay it on the table and let the
> American people decide."
> PETE KAYE (US Congressman), Radio 4
