On Mon, 4 Jul 2005, Daniel Haensse wrote: > used rmmod ehci_hcd, then plugged philips hub directly into the PC: hub > visible, but no attached devices. Kernel message now come uhci_hcd
That's right, since uhci-hcd is the full-speed driver. > Tried to change bios setting to full speed, but linux ignores this. The BIOS should be set to leave USB enabled but with Legacy USB support turned off. > After reset, the bios recognises the sandisk device attached to the philips > hub. Try turning on the USB verbose debugging switch in the kernel configuration (CONFIG_USB_DEBUG), and post the dmesg output show what happens when you boot with the sandisk device plugged into the hub. Alan Stern ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
