Hmmm... well that looks good to me... except for perhaps change the Option "Emulate3Buttons" "yes" to say Option "Emulate3Buttons" "on" My one is a on/off option, not a yes/no option...
Hopefully that will fix it, otherwise i'm not really sure if I can help ya sorry... I havn't met those errors before. The other thing is after looking at your original post again, I noticed this... (EE) xf86OpenSerial: Cannot open device /dev/mouse The bit thats interesting here is that it mentions serial,... but the protocol is PS/2... it is actually plugged in as PS/2 isn't it? Good Luck, Steve On Wed, Aug 28, 2002 at 04:38:53PM +1200, Bill Evans wrote: > Thanks Stephen > > XF86Config-4 > > Section "InputDevice" > Identifier "Mouse0" > # Modified by mouseconfig > Driver "mouse" > Option "Device" "/dev/psaux" > Option "Protocol" "IMPS/2" > Option "Emulate3Buttons" "yes" > Option "ZAxisMapping" "4 5" > EndSection > > > ls -l /dev/psaux > crw------- 1 root root 10, 1 Aug 28 16:16 /dev/psaux > > ls -l /dev/mouse > lrwxrwxrwx 1 root root 5 Aug 28 14:31 /dev/mouse -> psaux > > Bill > > > -- )--------------------Stephen Nicholas--------------------( Uni Hall Ph: (03) 341 1500 Private Bag 4760 Extn: 54419 Christchurch 021 504 412 [EMAIL PROTECTED] ICQ: 70245950 )---------------www.steve.nicholas.net.nz----------------(
