Alan Hi, Can you test with guvcview (http://guvcview.berlios.de)?
Maximum frame rate also depends on the pixel format and resolution, so choose a format and resolution that supports a high frame-rate (e.g m...@800x600) Regards, Paulo 2010/4/29 Alan <lameventa...@gmail.com>: > I have a problem with my camera: the framerate is too low. > I tested the camera using mplayer and motion with different light levels. > > So I tried to fix it by following the instructions here: > http://www.quickcamteam.net/documentation/how-to/how-to-maximize-the-frame-rate > > Unfortunately its still slow, and I think I messed up something > because every time I run uvcdynctrl I get this error: > [libwebcam] Unknown V4L2 private control ID encountered: 0x0A046D04 > (V4L2_CID_PRIVATE_BASE + 33844484) > > So I think at some moment I used an invalid parameter, so I thought I > could rmmod and modprobe uvcvideo to fix it, but no. Reconnecting the > camera doesn't help either. > > So is this an invalid parameter? If so, where is it stored, in some > memory inside the camera? > And how do I fix the framerate issue? > > Thanks! > > Alan > _______________________________________________ > Linux-uvc-devel mailing list > Linux-uvc-devel@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/linux-uvc-devel > _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
