hI dont assign same IP Range Both lan lard. make eth1 i.e Lan 172. or whatever u want Please Check and Revert Back.
Regards Sunil Naikwadi On Thu, 27 Mar 2008 shailesh shinde wrote : >hi all, > >I just installed centOS. there is 1 on board lan card. and pci card d-link . >on eth0 i have connected mtnl triband router. >and on eth1 i have connected lan cable which comes from my lan switch. >eth0 = >ip:192.168.1.234 /255.255.255.0 >gateway= 192.168.1.150 ( routers ip address) >dns= 203.94.227.70 / 203.94.243.70 >*************************************************** >eth1= >ip:192.168.1.245 / 255.255.255.0 ( which received through dhcp) >*************************************************** >i can ping 192.168.1.150 (mtnl router) can surf net. >but not able to ping local lan or not from lan to linux > I tried ip forwarding enabled but not worked. >when i try to ping lan says destination host unrechable. but when i make eth 0 >down then i am able to ping LAN IP. not when both r active. >PLEASE HELP ME OUT. I AM NEW TO LINUX. > >thanks >Shailesh Shinde > > > >--------------------------------- >Never miss a thing. Make Yahoo your homepage. > >[Non-text portions of this message have been removed] > [Non-text portions of this message have been removed]
