Dont say Thanks , On Mon, 31 Mar 2008 shailesh shinde wrote : >thanks. i assign differnet ip 192.168.1.150 to 192.168.0.1. it works >shailesh > >sunil <[EMAIL PROTECTED]> wrote: > hI > > dont assign same IP Range Both lan lard. > make eth1 i.e Lan 172. or whatever u want > Please Check and Revert Back. > > Regards > Sunil Naikwadi > > On Thu, 27 Mar 2008 shailesh shinde wrote : > >hi all, > > > >I just installed centOS. there is 1 on board lan card. and pci card d-link . > >on eth0 i have connected mtnl triband router. > >and on eth1 i have connected lan cable which comes from my lan switch. > >eth0 = > >ip:192.168.1.234 /255.255.255.0 > >gateway= 192.168.1.150 ( routers ip address) > >dns= 203.94.227.70 / 203.94.243.70 > >*************************************************** > >eth1= > >ip:192.168.1.245 / 255.255.255.0 ( which received through dhcp) > >*************************************************** > >i can ping 192.168.1.150 (mtnl router) can surf net. > >but not able to ping local lan or not from lan to linux > > I tried ip forwarding enabled but not worked. > >when i try to ping lan says destination host unrechable. but when i make > eth 0 down then i am able to ping LAN IP. not when both r active. > >PLEASE HELP ME OUT. I AM NEW TO LINUX. > > > >thanks > >Shailesh Shinde > > > > > > > >--------------------------------- > >Never miss a thing. Make Yahoo your homepage. > > > >[Non-text portions of this message have been removed] > > > > [Non-text portions of this message have been removed] > > > > > > >--------------------------------- >Special deal for Yahoo! users & friends - No Cost. Get a month of Blockbuster >Total Access now > >[Non-text portions of this message have been removed] >
[Non-text portions of this message have been removed]
