Hi, Firewall on the Switch is the latest installed. The Switch is just simple installed. No VLANS actually just IGMP disabled. Carp has for sure 3 IPs. 2 Dedicated for each Server and one CARP (Virtual Failover per Subnet)
-- Grüsse Daniel Am 06.06.17, 00:04 schrieb "List im Auftrag von Ugo Bellavance" <[email protected] im Auftrag von [email protected]>: On 2017-06-02 08:13 AM, Daniel wrote: > Hi there, > > i run 2 pfsense Firewalls. I tried to use CARP but it will turn over every 1-2-3 hours. > Sometimes it is so fast the pf1 is master and pf2 has the routes. In this case I need to reboot the both Servers. > > After I tried a lot id ont find any solutions. I took a different brand (Sophos UTM) and here is the same behave. > So I think this could be a network problem. > > Is there any important thinks which must be enabled or disabled in the Switch? > Or need the Switch some special configurations? > > When I use Linux with Bondig it also switch the NICs very often. > > We use 2 Switches from Netgear JGS524Ev2 > > Mayme someone has some experience with it? Can you give us more information? You do have 3 IP addresses per interface? How is your switch configured? Any tagged vLANs involved? Is the switch's firmware up to date? _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
